Abstract:Filled rubber has been extensively used in the repairing, retrofitting, and protecting of civil infrastructures due to its superior physical and mechanical properties. However, effects of large deformation and velocity impacts on the mechanical behavior of filled rubber are not well recognized, one of the major challenges in the past investigations is that the material exhibits significant nonlinearity and sensitivity to velocity. This paper presents a hyper-viscoelastic constitutive modeling and experimental study to capture both the hyperelastic and viscoelastic behaviors of filled rubber under large shear deformation and velocity impacts. Motivated by the micro-mechanism of filled rubber, the constitutive modeling consists of an equilibrium element in parallel with an improved Maxwell element to incorporate both nonlinear hyperelasticity and rate-dependent performance governed by the readjustment and rearrangement of molecular chains in the material. A new strain energy function is developed and the physical description of parameters in the strain energy function is highlighted. The Clausius-Duhem inequality is employed to consider the thermodynamic consistency of the model. Then, stress relaxation property and stress-strain response of filled rubber upon cyclic shear loading with different strain rates (ranging from 0.08 to 12.0 s−1) are experimentally studied, and some key observations are summarized. Subsequently, a “Gau-Poly” function is proposed based on the experimental data to describe the viscoelastic property of filled rubber versus strain and strain rate. Finally, stress-strain relationship and hysteretic area obtained from the experimental results were compared with the numerical results of the model, good agreement was achieved and the capacity of the model to accurately reproduce the mechanical behavior of filled rubber under a wide range of deformation and velocity impacts was verified.

Modeling and simulation for the swelling behavior of unvulcanized rubber during the calendering process

Experimental Characterization and Finite Element Modeling the Deformation Behavior of Rubbers with Geometry Defects

Mechanical Behaviors of Copolymer Elastomers: Experimental Characterization and Constitutive Modelling

Effect of Swelling Behavior of Rubber Rings on the Sealing Performance for 70MPA Hydrogen Pressure Reducing Valves

Effect of the temperature and strain rate on the tension response of uncured rubber: Experiments and modeling

A crosslinking kinetic model considering reversion effect with verification and its application in thick rubber vulcanization process

Experimental Investigation and Constitutive Modeling of Uncured Carbon Black Filled Rubber at Different Strain Rates

Effect of Vulcanization on the Tribological Behavior and Sealing Performance of EPDM Seals: Experimentation and Simulation

Effects of Large Deformation and Velocity Impacts on the Mechanical Behavior of Filled Rubber: Microstructure-Based Constitutive Modeling and Mechanical Testing

Effect of Vulcanization on Deformation Behavior of Rubber Seals: Thermal–mechanical–chemical Coupling Model, Numerical Studies, and Experimental Validation

A Visco-hyperelastic Constitutive Model for Rubber Considering the Strain Level and One Case Study in the Sealing Packer

Experimental Investigation and Constitutive Modeling of the Uncured Rubber Compound Based on the DMA Strain Scanning Method

Numerical simulation and experimental verification of heat build-up for rubber compounds

NUMERICAL IMPLEMENTATION OF THE TSCHOEGL–CHANG–BLOCH NONLINEAR VISCOELASTIC CONSTITUTIVE LAW FOR UNVULCANIZED CARBON BLACK–FILLED RUBBERS

A Novel Method for Constitutive Characterization of the Mechanical Properties of Uncured Rubber

RESEARCH ON NONLINEAR VISCOELASTIC CONSTITUTIVE MODEL FOR UNCURED RUBBER

Finite Element Simulation of Radial Tire Building and Shaping Processes Using an Elasto-Viscoplastic Model

Capillary non-Newtonian seepage model of unvulcanized rubber expressed by the four-parameter rheological flow

Mooney-Rivlin Parameter Determination Model as a Function of Temperature in Vulcanized Rubber Based on Molecular Dynamics Simulations

Experiments and modeling of the coupled viscoelasticity and Mullins effect in filled rubber materials

Finite Element Simulation of the Viscoelastic Behavior of Elastomers under Finite Deformation with Consideration of Nonlinear Material Viscosity