Abstract:The main component of raw natural rubber is cis-1, 4-polyisoprene (PI). To obtain better mechanical properties, raw natural rubber is usually vulcanized with sulfur to form a crosslinked network. To understand the relationship between the complicated network and the mechanical properties of vulcanized natural rubber (NR), several statistical models have been proposed since the 1940s by the pioneers such as Flory. To make complicated problems simple, two major assumptions were adopted in the models. (1) Only PI chains are considered in the crosslinked network. However, polysulfide chains are not included in the models. (2) Only the entropic elasticity of the network chains is taken into account, but the enthalpic elasticity (arising from variation of bond lengths and angles at large deformation) is ignored. As a result, there are several limitations in the traditional models. First, the traditional models fail to predict the elasticity of NR under large deformation. Second, the effects of sulfur content cannot be explained satisfyingly. To solve the above problems, Shuxun Cui and coworkers have made two modifications to the traditional models. First, the sulfur content is considered in the model. Second, the single-chain elasticities (which include both entropic and enthalpic elasticities) of the two main components of NR (PI and polysulfide) are integrated into the model. They found that the new model (called TCQMG model) is clearly superior to the traditional models (e. g., Gaussian model) in describing the mechanical properties of NR, especially for large deformation. In addition, the effect of sulfur content on the mechanical properties of NR can be explained well. Considering the similarity in network structures between NR and other vulcanized rubbers, it is expected that with more data of single-chain mechanics, this model may be used as a general model for various rubbers. With minor modifications, it is anticipated that the model could be applied in the field of supramolecular hydrogels.

A crosslinking kinetic model considering reversion effect with verification and its application in thick rubber vulcanization process

Kinetic mathematical model with induction and reversion for the vulcanization of natural rubber and ethylene propylene diene monomer blend

Experimental Characterization and Finite Element Modeling the Deformation Behavior of Rubbers with Geometry Defects

A Novel Approach for Simulation and Optimization of Rubber Vulcanization

Mechanical Behaviors of Copolymer Elastomers: Experimental Characterization and Constitutive Modelling

Effect of Vulcanization on the Tribological Behavior and Sealing Performance of EPDM Seals: Experimentation and Simulation

A thermo-mechanical material model for rubber curing and tire manufacturing simulation

NUMERICAL ANALYSIS OF HEAT TRANSFER AND CHEMICAL REACTION COUPLING IN THE RUBBER SEAL VULCANIZATION PROCESS

Modeling and simulation for the swelling behavior of unvulcanized rubber during the calendering process

A Novel Method for Constitutive Characterization of the Mechanical Properties of Uncured Rubber

Progress in Model for the Elasticity of Vulcanized Rubber

STATISTICS- KINETIC MODEL SIMULATION AND EXPERIMENTAL RESEARCH OF MMA/EGDMA RADICAL CROSSLINKING PSEUDO - TRI - POLYMERIZATION

RESEARCH ON NONLINEAR VISCOELASTIC CONSTITUTIVE MODEL FOR UNCURED RUBBER

A state-of-the-art review on the mathematical modeling and computer simulation of rubber vulcanization process

Closed form numerical approach for a kinetic interpretation of high-cis polybutadiene rubber vulcanization with sulphur

Effect of Vulcanization on Deformation Behavior of Rubber Seals: Thermal–mechanical–chemical Coupling Model, Numerical Studies, and Experimental Validation

A Network Evolution Model for Recovery of the Mullins Effect in Filled Rubbers

Coupled Mechanical and Kinetic Modeling of Recovery in Asphalt Mixtures

Network Alteration of Cyclically Loaded Elastomers Mediated by Dynamic Bonds

Vulcanization Modeling and Mechanism for Improved Tribological Performance of Styrene-Butadiene Rubber at the Atomic Scale

Optimization Strategy for Process Design in Rubber Injection Molding: A Simulation-Based Approach Allowing for the Prediction of Mechanical Properties of Vulcanizates