Mechanical properties, rheology, and crystallization of epoxy-resin-compatibilized polyamide 6/polycarbonate blends: Effect of mixing sequences
Qi Wang,Yaogui Jiang,Liping Li,Pan Wang,Qi Yang,Guangxian Li
DOI: https://doi.org/10.1080/00222348.2011.565273
2012-01-01
Abstract:Blends of polyamide 6 (PA6)/polycarbonate (PC)/epoxy resin (EP) were melt blended with three different mixing sequences. Their mechanical properties, crystallization, and rheological behaviors, as well as the morphology, were investigated via mechanical testing, differential scanning calorimetry (DSC), dynamic rheometry, and scanning electron microscopy (SEM). it was noted that the mixing sequences affected the distribution of EP in the PA6 matrix, as well as the reactivity of EP with PA6 and PC. Mechanical testing showed that the blends prepared by the first (S blending PA6, PC, and EP simultaneously) and second mixing sequences (S2, blending PC with a premixture of PA6/EP) had higher notched hod impact strengths due to the formation of PA6-EP-PC block copolymer (named as the AEC structure) during compounding, as evidenced by the results of dynamic theology and SEM. Whereas for the third sequence (53, blending PA6 with a premixture of PC/EP), EP could barely react with PA6 and PC., leading to little formation of AEC structure, which resulted in a poor notched hod impact strength of the blends. The incorporation of EP actually acted as a plasticizer to improve the elongation at break of the S3.blends. In addition, the DSC results and SEM observations showed that there were distinct differences in the crystallization and morphology of the samples prepared by the different miring sequences.