Abstract:Filled rubber has been extensively used in the repairing, retrofitting, and protecting of civil infrastructures due to its superior physical and mechanical properties. However, effects of large deformation and velocity impacts on the mechanical behavior of filled rubber are not well recognized, one of the major challenges in the past investigations is that the material exhibits significant nonlinearity and sensitivity to velocity. This paper presents a hyper-viscoelastic constitutive modeling and experimental study to capture both the hyperelastic and viscoelastic behaviors of filled rubber under large shear deformation and velocity impacts. Motivated by the micro-mechanism of filled rubber, the constitutive modeling consists of an equilibrium element in parallel with an improved Maxwell element to incorporate both nonlinear hyperelasticity and rate-dependent performance governed by the readjustment and rearrangement of molecular chains in the material. A new strain energy function is developed and the physical description of parameters in the strain energy function is highlighted. The Clausius-Duhem inequality is employed to consider the thermodynamic consistency of the model. Then, stress relaxation property and stress-strain response of filled rubber upon cyclic shear loading with different strain rates (ranging from 0.08 to 12.0 s−1) are experimentally studied, and some key observations are summarized. Subsequently, a “Gau-Poly” function is proposed based on the experimental data to describe the viscoelastic property of filled rubber versus strain and strain rate. Finally, stress-strain relationship and hysteretic area obtained from the experimental results were compared with the numerical results of the model, good agreement was achieved and the capacity of the model to accurately reproduce the mechanical behavior of filled rubber under a wide range of deformation and velocity impacts was verified.

Study on Mechanical Properties of Vulcanized Natural Rubber with Filler

Experimental Characterization and Finite Element Modeling the Deformation Behavior of Rubbers with Geometry Defects

A Molecular Study on the Reinforcement of Polymethylene Elastomers

Study of the Effect of Carbon Black Filling on the Mechanical Behavior of Rubber Hyper-Elasticity

Effects of Large Deformation and Velocity Impacts on the Mechanical Behavior of Filled Rubber: Microstructure-Based Constitutive Modeling and Mechanical Testing

A Visco-hyperelastic Constitutive Model for Rubber Considering the Strain Level and One Case Study in the Sealing Packer

Linear Rheology of Natural Rubber Compounds Filled with Silica, Short Nylon Fiber or Both

RESEARCH ON NONLINEAR VISCOELASTIC CONSTITUTIVE MODEL FOR UNCURED RUBBER

A Network Evolution Model for Recovery of the Mullins Effect in Filled Rubbers

Enhanced Mechanical Properties of Natural Rubber by Block Copolymer-Based Porous Carbon Fibers

Simulation of Mechanical Behaviour of Vulcanized EPDM/PA Blends

A Novel Method for Constitutive Characterization of the Mechanical Properties of Uncured Rubber

Dynamic Mechanical Properties of Aged Filled Rubbers

Nonlinear viscoelastic behavior and their time-temperature superposition for filled styrene butadiene rubber compounds and vulcanizates

Finite viscoelasticity of filled rubbers: experiments and numerical simulation

A Novel Constitutive Model of Carbon Black Rubber for the Numerical Analysis of Press-Fitting of Rubber Bushing

Characterization of Viscoelastic Properties Considering the Nonrelaxation for Filled Rubber

Three-dimensional numerical simulations on the hyperelastic behavior of carbon-black particle filled rubbers under moderate finite deformation

Microstructure Evolution and Strain Softening of Carbon Black Filled Natural Rubber Vulcanizates

Nonlinear finite element analysis on the sealing performance of rubber packer for hydraulic fracturing

Rigid Nanoparticles Promote the Softening of Rubber Phase in Filled Vulcanizates