Abstract:In this paper, we propose a novel acquisition system, which can flexibly adjust the sampling rate according to different sampling requirements. First, we propose a sampling model and conduct feasibility verification experiments on it. The experimental results show that the sampling principle has excellent sampling function. Subsequently, we successfully implemented the system. The system combines the differential comparator of FPGA with the characteristics of TDC, which makes full use of the hardware resources of FPGA to realize efficient digital sampling and reconstruction of unknown signals. Among them, the TDC we designed has a time error of less than 100ps at sampling rates lower than 50MSps. the sampled signal is transmitted via Ethernet, and the measured on-chip data link throughput rate reaches 600 Mbps. the sampled information is decoded, fitted and reconstructed in the host computer. In addition, we have thoroughly studied the factors affecting the sampling quality in this acquisition method and summarized the sampling laws after acquiring multiple signals. To ensure the minimum distortion rate, we choose the threshold signal amplitude as 0-5 times of the highest amplitude of the sampled signal, and select the frequency as 10-30 times. Regarding the system resource consumption, the LUT utilization rate is 12.22%, the Slice utilization rate is 23.37%, and the overall design power consumption is 2.094 W. Finally, after a comprehensive evaluation of the performance of the system, the results show that the system has a small error, high precision, and high-speed dynamic sampling function. Synthesizing this paper, the system shows good engineering practicability and feasibility in the field of measurement.

Signal Acquisition Card Based on TIADC

Design of Vibration Signal’s Multi-channel Integer Period Synchronous Acquisition Card

Design and Realization of a TMS320F2812 -Based High- Speed Simultaneous Signal Acquisition System

Dynamic Sample Rate Acquisition System Based on Time-to-digital Converter Technology

Design of a 20-Gsps 12-Bit Time-Interleaved Analog-to-digital Conversion System

Design of Multi-channel Real-time Signal Acquisition System

Design of 1Gsps high-speed data acquisition card

Photonic-Assisted Time-Interleaved Adc Based on Optical Delay Line

Development of dual-channel high-speed data acquisition card based on PCI bus

Testing and Evaluation of a 20-Gsps High-Resolution Waveform Digitizer Based on TIADC Technique

DMA-based High-Speed Parallel Acquisition System of Digital Signals

An 8-bit, 8-GS/s Equivalent Sampling Time Domain Analog-to-digital Converter

A 0.55-Mm2 8-Bit 32-Gs/s TI-SAR ADC with Optimized Hierarchical Sampling Architecture

High frequency signal acquisition and control system based on DSP+FPGA

A 0.55-mm 2 8-bit 32-GS/s TI-SAR ADC with optimized hierarchical sampling architecture

An 8-Gs/s 12-Bit TIADC System With Real-Time Broadband Mismatch Error Correction

Design of Synchronous Data Acquisition Card Based on DSP and PCI Bus

Implementation of Time Interleaved ADC Based on Delay Line

Development of High-Speed Data Acquisition Card Based on PXI Express Bus

Design of dedicated high-speed signal acquisition card based on PCIe bus

Multi-channel Parallel Signal Acquisition and 10G High-speed Transmission System