Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. The variable-speed scroll compressors can adapt to the various demands of heating and cooling capacity, and the rotational speeds significantly influence the rotor dynamic and bearings lubrication, which might cause performance and reliability issues. In this paper, numerical models for the rotor-bearing-frame system are developed by coupling the Reynolds equation, rotor dynamic equation, and the flexibility equation of the frame. The experimental apparatus is also established to directly measure the journal displacement response in the hermetic high-pressure shell of the compressor. The predicted journal center trajectories are compared with the experimental results and they show good agreement. Results show that the whirl radius decreases with the increase of rotational speed at the measuring point, while the opposite tendency can be observed at the bottom of the main bearing. Transient dynamic analysis of the rotor shows that the tilting and deformation of the rotor vary with respect to different rotational speeds. The displacement of the crank part could lead to the separating tendency between orbiting and fixed scrolls through the coupled orbiting bearing, especially at the lower rotational speed, due to the pull of main balance weight. The numerical results also reveal that the distribution of oil film pressure is dominated by the squeeze effect due to the relatively stable magnitude but the variable direction of loads on the shaft. The influence of the deformation of the cantilevered bearing frame on the oil film thickness is significant but the maximum deformation moves downward at the higher rotational speed.

Scroll Compressor Vibration Testing and Structural Optimization

Vibration and Noise Research on Oxygen Generator and Structural Optimization

Research on Vibration and Noise Characteristics of Scroll Compressor with Condenser Blockage Fault Based on Signal Demodulation

Study on Characteristics of the Vibration and Noise of High-Power Scroll Compressor

Experimental Investigation of Non-synchronous Vibration and Its Mechanism Analysis by Using a Cantilever Beam-Like Compressor Cascade

Optimal Design and Study on Dynamic Balance of Scroll Compressor Transmission System

Numerical Simulation and Experimental Validation of the Vibration Modes for a Processing Reciprocating Compressor

Mechanical analysis of key components and machine performance for the oil regeneration project compressor

Study on the Contact and Size of Radial and Flank Leakage Gaps of Scrolls in a Scroll Compressor with CFD/CSM Simulations

Tribo-dynamics Modeling and Analysis of Key Friction Pairs in Scroll Compressor with Floating Fixed Scroll Design

Investigation on the modifications of the suction flow passage in a scroll refrigeration compressor

Vibration Analysis and Control of a Screw Compressor Outlet Piping System

Structural Optimization on Vane-type Vortex Generator of Compressor Cascades Based on Orthogonal Experiment

Analysis and Control of Discharge Piping Vibration of a Screw Compressor Used in a Chemical Plant

Durability of Domestic Scroll Compressor Systems

Temperature and thermal deformation analysis on scrolls of scroll compressor

Vibration Analysis and Rebuilding for Superhigh Pressure Reciprocating Compressor

Experimental and numerical study on the dynamic and lubrication characteristics of the rotor-bearing-frame system in a variable-speed scroll compressor

Transient flow and thermodynamics analysis of a scroll compressor based on CFD

Research on the Dynamic Characteristic of CO2 Scroll Compressor

Research and Solution of Vibration Problem of an Air-cooled Heat Exchanger of Reciprocating Compressor