Abstract:The transient flow model of a scroll refrigeration compressor which included axial clearance was established in the paper using PUMPLINX based on the computational fluid dynamics and the dynamic grid methodology. According to the actual size in the physical compressor, the flank and the axial clearances were set equal to 0.030 mm and 0.015 mm, respectively. As the fluid domain of the axial clearance was too small to generate enough layers of grids in PUMPLINX, it was first magnified 100 times to generate grids of high quality, and then the fluid domain and grids were recompressed to the original size. The simulation results were verified experimentally. The influence of the radial leakage on the downstream flow field was investigated. Moreover, the characteristics of radial and tangential leakage flows were analyzed. It was concluded that the predictions of the compressor performance, except the discharge temperature, are improved after the axial clearance was included in the model. The radial leakage is dominant while a portion of involute leakage flow exists near the flank clearance. The influence of radial leakage on the downstream temperature is lower than that of the tangential leakage in flank clearance. The tangential leakage flow is turbulent basically while the radial leakage flow is laminar. The tangential leakage is severer at the beginning of the discharge process, and the radial leakage is more remarkable at the end of the compression process. When the pressure ratio across the leakage path is higher than the critical pressure ratio, the tangential leakage flow becomes supersonic for the converging–diverging clearance structure, while the radial leakage flow remains subsonic due to the larger flow losses. The results obtained through this research could be applied to modify the current leakage models and optimize the clearances of scroll compressors.

Investigation on the modifications of the suction flow passage in a scroll refrigeration compressor

Performance Improvement of Twin Screw Refrigeration Compressors for Chillers by Modifying the Suction Arrangement

Experimental Investigation on the Scroll Refrigeration Compressor with External Cooling

Numerical analysis of the transient leakage flow in axial clearance of a scroll refrigeration compressor

Transient flow and thermodynamics analysis of a scroll compressor based on CFD

Analysis of 3D Transient Flow in a High-Speed Scroll Refrigeration Compressor

Study on suction pressure loss near suction end and stagnant pressure rise in p-θ diagram of Twin-screw refrigeration compressor for chiller

An Improved Geometric Theoretical Model and Throughflow Prediction Method for a CO2 Scroll Compressor of Automotive Air Conditioning System

Performance Improvement of a Centrifugal Compressor by a Variable Low Solidity Diffuser

Investigation of a Highly Loaded Transonic Centrifugal Compressor Using an Advanced Design Method

Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors

Study on the Contact and Size of Radial and Flank Leakage Gaps of Scrolls in a Scroll Compressor with CFD/CSM Simulations

Performance Investigation and Design Optimization of Novel Rotating-Cylinder Sliding Vane Rotary Compressors

Internal Flow and Cavitation Analysis of Scroll Oil Pump by CFD Method

Design improvement for suction shape in rotary compressor

Performance Investigation of a Pressure Pulsation Dampener Applied in the Discharge Chamber of a Twin Screw Refrigeration Compressor

Research on Performance of Scroll Compressor and System under Suction Injection

Influence of two-phase suction injection on performances of the scroll refrigeration compressor with a high-temperature shell

THREE-DIMENSION NUMERICAL SIMULATION OF DISCHARGE FLOW IN A SCROLL AIR COMPRESSOR

Modulation Method of Scroll Compressor Based on Suction Gas Bypass

Study on Performance of Scroll Compressor for Micro-Refrigeration Systems by CFD Method