Abstract:Computational methods were used to analyse the elasto-hydrodynamic lubrication of a complex rotor–bearing system. The methodology employed computational fluid dynamics (CFD), based on the Navier–Stokes equation and a fluid–structure interaction (FSI) technique. A series of models representing the system were built using the CFD–FSI methodology to investigate the interaction between the lubrication of the fluid film, and elastic dynamics of the rotor and journal bearing. All models followed an assumption of isothermal behaviour. The FSI methodology was implemented by setting nodal forces and displacements to equilibrium at the fluid–structure interface, therefore allowing the lubrication of the fluid and the elastic deformation of structures to be solved simultaneously. This is significantly different to the more common techniques—such as the Reynolds equation method—that use an iterative solution to balance the imposed load and the force resulting from the pressure of the fluid film to within a set tolerance. Predictions using the CFD–FSI method were compared with the results of an experimental study and the predictions from an ‘in-house’ lubrication code based on the Reynolds equation. The dynamic response of the system was investigated with both rigid and flexible bodies for a range of different bearing materials and dynamic unbalanced loads. Cavitation within the fluid film was represented in the CFD–FSI method using a simplified phase change boundary condition. This allowed the transition between the liquid and vapour phases to be derived from the lubricant’s properties as a function of pressure. The combination of CFD and FSI was shown to be a useful tool for the investigation of the hydrodynamic and elasto-hydrodynamic lubrications of a rotor–bearing system. The elastic deformation of the bearing and dynamic unbalanced loading of the rotor had significant effects on the position of its locus.

Elasto-hydrodynamic lubrication of the journal bearing system with a relief groove in the scroll compressor: Simulation and experiment

Experimental and numerical study on the dynamic and lubrication characteristics of the rotor-bearing-frame system in a variable-speed scroll compressor

Tribo-dynamics Modeling and Analysis of Key Friction Pairs in Scroll Compressor with Floating Fixed Scroll Design

Transient Multibody Tribo-Dynamics Analysis of the Orbiting Scroll in a Three-Bearing Scroll Compressor

Lubrication Analysis of Journal Bearing and Rotor System Using Cfd and Fsi Techniques

Lubrication and stability analysis of nonlinear rotor-bearing system

Simulation of the Characteristics of the Water-Lubricated Journal Bearing in Twin-Screw Air Compressor

Mixed elastohydrodynamic analysis of a coupled journal-thrust bearing system in a rotary compressor under high ambient pressure

A New Method for Studying the 3D Transient Flow of Misaligned Journal Bearings in Flexible Rotor-Bearing Systems

Static Characteristics and Dynamic Coefficients of a Gas-Oil Lubricated Journal Bearing under a Pressurized Refrigerant Environment

Study on performance of composite journal bearing sealed and lubricated with ferrofluid

Study on the Theoretical Model of Compliant Foil Journal Bearing with Elastic Support

The Analysis of Elastohydrodynamic Lubrication in the Textured Journal Bearing

Analysis on the Lubrication Performances of Journal Bearing System Using Computational Fluid Dynamics and Fluid–structure Interaction Considering Thermal Influence and Cavitation

Application of Computational Fluid Dynamics and Fluid–Structure Interaction Method to the Lubrication Study of a Rotor–Bearing System

Dynamic analysis of a high-speed micro compressor supported by spiral-grooved hydrodynamic air bearing

Experimental and Simulated Investigation of Lubrication Characteristics of a Water-Lubricated Bearing in a Single-Screw Compressor

Numerical simulation of the dynamic fluid–solid coupling in journal bearing with the effect of surface topography in consideration

Dynamic analyses for the rotor-journal bearing system of a variable speed rotary compressor

Experimental research on solid-lubrication journal bearing of unlubricated compressor

Research on Axis Orbit of the Journal Bearing Lubricated with Oil and Refrigerant Mixtures in a Twin-Screw Refrigeration Compressor