Abstract:We demonstrate here that the electrochemical generation of hydroxyl ions and hydrogen bubbles can be used to induce the synthesis of enzyme- or protein-encapsulated 3D porous silica structure on the surface of noble metal electrodes. In the present work, the one-step synthesis of a glucose oxidase (GOD)-encapsulated silica matrix on a platinum electrode is presented. In this process, glucose oxidase was mixed with ethanol and TEOS to form a doped precursory sol solution. The electrochemically generated hydrogen bubbles at negative potentials assisted the formation of the porous structure of a GOD-encapsulated silica gel, and then the one-step immobilization of enzyme into the silica matrix was achieved. Scanning electron microscopy (SEM) and scanning electrochemical microscopy (SECM) characterizations showed that the GOD-encapsulated silica matrix adhered to the electrode surface effectively and had an interconnected porous structure. Because the pores started at the electrode surface, their sizes increased gradually along the distance away from the electrode and reached maximum at the solution side, and effective mass transport to the electrode surface could be achieved. The entrapped enzyme in the silica matrix retained its activity. The present glucose biosensor had a short response time of 2 s and showed a linear response to glucose from 0 to 10 mM with a correlation coefficient of 0.9932. The detection limit was estimated to be 0.01 mM at a signal-to-noise ratio of 3. The apparent Michaelis -Menten constant (K-m(app)) and the maximum current density were determined to be 20.3 mM and 112.4,mu A cm(-2), respectively. The present method offers a facile way to fabricate biosensors and bioelectronic devices in situ.

An Amperometric Glucose Biosensor Constructed by Immobilizing Glucose Oxidase on Titanium-Containing Mesoporous Composite Material of No. 41 Modified Screen-Printed Electrodes.

A glucose oxidase sensor based on screen-printed carbon electrodes modified by polypyrrole.

A Glucose Electrochemical Sensor Based on Glucose Oxidase Immobilized in Aminopropyl-Magnesium Phyllosilicate Nanosheets Matrix

Amperometric Detection of Glucose with Glucose Oxidase Absorbed on Porous Nanocrystalline TiO2 Film

Glucose biosensor based on glucose oxidase immobilized on a nanofilm composed of mesoporous hydroxyapatite, titanium dioxide, and modified with multi-walled carbon nanotubes

Development of an Amperometric Glucose Biosensor Based on the Immobilization of Glucose Oxidase on the Se-MCM-41 Mesoporous Composite

Bienzymatic Glucose Biosensor Based on Poly(vinyl alcohol)/Titanium Dioxide Hybrid Materials and Carbon Nanotubes-Nanocopper-Modified Glassy Carbon Electrode

Construction of flexible enzymatic electrode based on gradient hollow fiber membrane and multi-wall carbon tubes meshes.

Development of Glucose Amperometric Biosensor Based on a Novel Attractive Enzyme Immobilization Matrix: Amino Derivative of Thiacalix[4]arene

A Glucose Biosensor Based on Immobilization of Glucose Oxidase into 3D Macroporous TiO2

Sensitive enzymatic glucose detection by TiO2 nanowire photoelectrochemical biosensors

An Amperometric Biosensor Based on Glucose Oxidase Immobilized in A Sol-Gel Polyvinyl Alcohol/Silica Hybrid Composite Film on A Prussian Blue Modified Electrode

One-Step Immobilization Of Glucose Oxidase In A Silica Matrix On A Pt Electrode By An Electrochemically Induced Sol-Gel Process

Construction of Amperometric Glucose Biosensor Based on In-Situ Fabricated Hierarchical Meso-Macroporous SiO2 Modified Au Film Electrodes

A mediator-free glucose biosensor based on glucose oxidase/chitosan/α-zirconium phosphate ternary biocomposite.

Amperometric glucose biosensor based on boron-doped carbon nanotubes modified electrode.

Ti3C2Tx MXene/Graphene/AuNPs 3D porous composites for high sensitivity and fast response glucose biosensing

Amperometric Glucose Enzyme Electrode by Immobilizing Glucose Oxidase in Multilayers on Self-Assembled Monolayers Surface.

3D Hydrogen Titanate Nanotubes on Ti Foil: A Carrier for Enzymatic Glucose Biosensor

Amperometric glucose sensor based on glucose oxidase immobilized in electrochemically generated poly(ethacridine)

Fabrication of an Amperometric Biosensor Based on the Immobilization of Glucose Oxidase in a Modified Molecular Sieve Matrix