Abstract:In this study, we regulate adhesion between thin metal films to produce a large-area vacuum nanogap for electron tunneling. Multilayer structures comprising thin metal films with adjustable adhesion were fabricated. The Cu/Ag/Ti/Si structures were grown on Si substrates and include thin Ti and Ag films and a thick Cu layer. The Ag and Ti films were deposited on the Si substrate under vacuum, and a thick Cu layer was subsequently electroplated onto the Ag surface. Later, the sandwich was separated and a vacuum nanogap was opened to produce two Ag/Cu and Ti/Si conformal electrodes. The adhesion strength between the Ti and Ag films was precisely adjusted by exposing the structures to dry O2 after Ti growth but before Ag growth. The resulting adhesion needed to be sufficiently high to allow electroplating of Cu and sufficiently low to allow subsequent separation. Either heating or cooling was used to separate the sandwiches. T he structures separated as a result of the different thermal expansion parameters of the Si and Cu electrodes and the low adhesion between the Ti and Ag layers. After separation, the Ag and Ti surfaces were analyzed optically using a Michelson interferometer. Adhesion regulation and optimization of the electroplating regime allowed fabrication of two conformal electrodes with a nanogap smaller than 5 nm and an area larger than 7 mm2. Such electrodes can be used for efficient energy conversion and cooling in the mixed thermionic and thermotunneling regime.

Finely Tuning Metallic Nanogap Size with Electrodeposition by Utilizing High‐Frequency Impedance in Feedback

Formation of Nanogaps by Nanoscale Cu Electrodeposition and Dissolution

Electrochemical Approach for Fabricating Nanogap Electrodes with Well Controllable Separation

Fabrication of A Nano-Scale Gap by Selective Chemical Deposition

Quantized Tunneling Current in the Metallic Nanogaps Formed by Electrodeposition and Etching

Lithography-Independent and Large Scale Fabrication of A Metal Electrode Nanogap

Fabrication of nanometer-spaced electrodes using gold nanoparticles

Fabrication of Sub-10 Nm Gap by Using Electron Beam Lithography

Fabrication of Metal Nanoelectrodes by Interfacial Reactions

Tunable and scalable fabrication of plasmonic dimer arrays with sub-10 nm nanogaps by area-selective atomic layer deposition

Highly efficient and controllable method to fabricate ultrafine metallic nanostructures

Electrochemical Fabrication of Atomically Thin Metallic Wires and Electrodes Separated with Molecular-Scale Gaps

Fabrication of nanogap metal electrode with sacrificial layer techniques

Real Time and in Situ Control of the Gap Size of Nanoelectrodes for Molecular Devices

Tuning the Architecture of Mesostructures by Electrodeposition

Fabrication and Application of Nanometer-sized Metal Electrodes in Electroanalytical Measurements

Tuning Of Narrow Geometric Resonances In Ag/Au Binary Nanoparticle Arrays

Nanogap Structures: Large‐Scale Sub‐1‐nm Random Gaps Approaching the Quantum Upper Limit for Quantitative Chemical Sensing (Advanced Optical Materials 24/2020)

One at A Time: Counting Single-Nanoparticle/Electrode Collisions for Accurate Particle Sizing by Overcoming the Instability of Gold Nanoparticles under Electrolytic Conditions

Vacuum nanogap formation in multilayer structures by an adhesion-controlled process

Precise Fabrication of Uniform Molecular Gaps for Active Nanoscale Devices