Abstract:For applicability in the field of semiconductor, it is important that the thermal expansion coefficient of heat sink materials approximates to those of semiconductor chip and peripheral material. In addition, high thermal conductivity and densification also is required. Mo/Cu composites are desirable for thermal management applications because of its combination of low thermal expansion coefficient and high thermal conductivity. In this paper, Mo/Cu composites with volume fractions of 55% ∼ 67% Mo content have been fabricated by the cost-effective squeeze-casting technology. The microstructures and thermo-physical properties of the Mo/Cu composites were investigated. The experimental results showed that: (1) the full densities of the Mo/Cu composites were achieved and the microstructures of the Mo/Cu composites were homogenous compound structures of adhesive phase Cu linking Mo grains. (2) The mean linear coefficients of thermal expansion (20 °C ∼ 100°C) of Mo/Cu composites ranged from 7.9 to 9.3 × 10-6/ °C and decreased with an increase in volume fraction of Mo content. The experimental coefficients of thermal expansion agreed well with predicted values based on Kerner's model. (3) Their thermal conductivities were increased with the increasing of volume fraction of Cu content and as high as 220-270 W/(m·°C). This was attributed to the fact that the full densities and high purity of Mo/Cu composites were achieved through the cost-effective squeeze-casting technology processes. As a result, the properties of the Mo/Cu composites are good enough to satisfy electronic packaging applications.

Fabrication and characterization of high dense Mo/Cu composites for electronic packaging applications

Microstructure and thermal and electric conductivities of high dense Mo/Cu composites

Fabrication and thermal expansion properties of high dense Mo/Cu composites

Microstructure and Mechanical Properties of High Densification Mo/Cu Composites

The thermo-physical properties of high dense Mo/Cu composites fabricated by squeeze casting technology

Highly Dense Mo/Cu Composites Fabricated by Squeeze Casting and Their Thermal Conduction Properties

Fabrication and Properties of SiC/Cu Composites for Electronic Packaging

Microstructure and thermal properties of SiCp/Cu composites with Mo coating on SiC particles

Thermal Expansion Properties of SiCp/Cu Composites in Electronic Packaging Applications

The Thermal and Electric Conduction Properties of High Dense TiB2P/Cu Composites Fabricated by Squeeze Casting Technology

Fabrication and thermo-physical properties of TiB2p/Cu composites for electronic packaging applications

Microstructure and properties of Mo-50%Cu alloy by mechanical milling and pressure-assisted solid state sintering

Thermal Expansion and Mechanical Properties of High Reinforcement Content Sicp/Cu Composites Fabricated by Squeeze Casting Technology

Densification and Properties Investigation of W-Mo-Cu Composites Prepared by Large Current Electric Field Sintering with Different Technologic Parameter

Properties of high reinforcement-content aluminum matrix composite for electronic packages

Research Progress in Copper Matrix Composites for Electronic Packaging

Fabrication and Thermal Properties of Hot Press Sintered Cr-coated Carbon Fiber/cu Composites

Study on the tribological properties of MoB/Cu laminated composite materials fabricated by hot-pressing process

Microstructure and mechanical properties of Mo–Cu–Zr composites fabricated via microwave sintering

Enhanced softening resistance and mechanical properties of Mo 2 C particle-reinforced Cu-matrix composites

Enhancing the physical properties of Mo-Cu composites through plasma spheroidized spherical molybdenum powder