Abstract:The list of reacting flows in porous media applications is quite long, including porous media combustion, syngas production, and fuel cells. Porous media combustion is recognized as a cutting-edge combustion technique for increasing flammability. In this process, heat is transferred from the exothermic reaction zone to the incoming reactants through porous media. This role of porous media distinguishes reacting flows in porous media from free combustion processes. Local heat transfer, such as solid conduction, solid-solid radiation, and solid-gas convection, as well as the response behavior, are affected by the topology of the porous material. Theoretical studies indicate that continuously graded porous materials can significantly enhance the performance benefits of heat transfer. However, topology design is challenging for smooth graded porous media, and thus investigations of combustion within graded porous media are still required. In this study, we constructed a porous structure of type W/P/D/G (porosity epsilon = 0.3-0.5, hydraulic diameter d(h) = 1.33-3.86 mm) using a triply periodic minimal surface (TPMS), and a computational model of the combustion reaction in porous media was established to compare the range of flame stability within different pore types. In addition, topology gradation was achieved via TPMS to modulate the heat transfer to ensure the dependable functioning of premixed flames and improved heat recirculation. Heat transfer in the graded TPMS-based porous structure was analyzed numerically. The conclusions obtained from this study can effectively address the aforementioned challenges related to porous media burner design.

Experimental and Numerical Study on Surface Radiation Performance of a Two-Layer Porous Burner

Experimental Study on Porous Media Burner with Top Radiator

Radiation Output Efficiency and Emissions in a Porous Burner

Experimental and Numerical Study on the Combustion Characteristics of Premixed Methane/Air in Porous Media Burner

Experimental and Numerical Study of a Two-Stage Swirl Burner

Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner

OXYGEN-ENRICHED COMBUSTION IN A HORIZONTAL FURNACE AND THREE- DIMENTIONAL NUMERICAL SIMULATION TEST THEREOF

Experimental Study on Premixed Combustion in Two-Layer Porous Media with Embedded Heat Exchangers

Nunerical Investigation of Premixed Combustion Within a Two-layer Porous Burner

Methane/Air Fuel-Rich Combustion in a Catalyst Enhanced Two-Layer Porous Media Burner

Low-Calorific Gas Combustion in A Two-Layer Porous Burner

Modulation of Heat Transfer in a Porous Burner Based on Triply Periodic Minimal Surface

Experimental study of industrial low nitrogen porous media burner

STUDY OF HYDROGEN PRODUCTION BY METHANE-RICH COMBUSTION IN A TWO-LAYER POROUS MEDIUM

EXPERIMENTAL AND NUMERICAL STUDY ON THE IMPROVEMENT OF THE VANES OF THE HORIZONTAL BIAS BURNER

Combustion and Heat Transfer of Premixed Natural Gas in a Porous Media Burner

Numerical Study on the Characteristics of Methane Hedging Combustion in a Heat Cycle Porous Media Burner

Experimental Study on Temperature Variation in a Porous Inert Media Burner for Premixed Methane Air Combustion

Numerical Study of the Combustion Characteristics of an 800-1200 kW High-Power Porous Media Combustor at Atmospheric Pressure

Numerical Simulation for Gas-solid Two-phase Flow in New Type Rich-lean Steady Burner

Investigation on Premixed Combustion in Porous Medium Burner