Abstract:The combination of oxy-fuel and porous media combustion can considerably broaden the lean-burn limit while significantly improving combustion stability. It is foreseeable that some of the deficiencies under oxyfuel condition will be overcome. In this paper, a two-layer porous burner model is established, in which the CH 4 skeletal kinetic mechanism and a two-temperature equation model are adopted for calculation purposes. Corresponding experiments are set up to verify the accuracy of the mathematical model. After that, the stable range and temperature field under oxy-fuel conditions, as well as the resulting CO emissions, are studied in detail. The stable range can be substantially broadened by adjusting the equivalence ratio and the oxygen fraction in the combustion-supporting gas. Stable combustion can be achieved under an inlet velocity of 2–29 cm/s and a thermal load of 36–834 kW/m 2 . Properly preheating the premixed gas can also effectively broaden the stable range, while the flame temperature will not rise sharply. The difference in the peak temperature between the solid and gas phases is in the range of 170–200 K. In addition, the peak temperature of the solid phase is located 0.8–1.2 cm downstream that of the gas phase. Extremely low or high equivalence ratios and oxidizer ratios need to be avoided, as they can introduce large amounts of CO emissions. When the flame peak temperature is controlled between 1300 and 1700 K, the CO emissions can reach values lower than 5 ppm.

Nunerical Investigation of Premixed Combustion Within a Two-layer Porous Burner

Numerical Simulation of Laminar Premixed Combustion in a Porous Burner

Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner

Detailed Numerical Simulation of Transient Mixing and Combustion of Premixed Methane/air Mixtures in a Pre-Chamber/main-chamber System Relevant to Internal Combustion Engines

Experimental and Numerical Study on the Combustion Characteristics of Premixed Methane/Air in Porous Media Burner

Investigation on Premixed Combustion in Porous Medium Burner

Numerical Investigation of Premixed Combustion in Porous Media

Numerical Study of the Premixed Propane/air Flame Characteristics in a Partially Filled Micro Porous Combustor

Experimental Study on Premixed Combustion in Two-Layer Porous Media with Embedded Heat Exchangers

NUMERICAL AND EXPERIMENTAL STUDY OF PREMIXED COMBUSTION WITHIN POROUS MEDIA

Numerical Study of Premixed Combustion of Nature Gas Within Inert Porous Media

A Numerical Investigation on Characteristics of Turbulent Premixed Flame in Porous Media

Combustion and Heat Transfer of Premixed Natural Gas in a Porous Media Burner

STUDY OF HYDROGEN PRODUCTION BY METHANE-RICH COMBUSTION IN A TWO-LAYER POROUS MEDIUM

Numerical simulation and theoretical analysis of premixed low-velocity filtration combustion

Experimental investigation on dynamic characteristics of methane/air combustion in double‐layer pellets porous media

Numerical Simulation of Methane Combustion in Two-Layer Porous Media Under Oxy-Fuel Condition

Low-Calorific Gas Combustion in A Two-Layer Porous Burner

Experimental and Numerical Investigation on Performance of a Porous Medium Burner with Reciprocating Flow

Methane/Air Fuel-Rich Combustion in a Catalyst Enhanced Two-Layer Porous Media Burner