Numerical Study on Methane/air Combustion Characteristics in a Heat-Recirculating Micro Combustor Embedded with Porous Media
Yunfei Yan,Chenghua Zhang,Gange Wu,Shuai Feng,Zhongqing Yang
DOI: https://doi.org/10.1016/j.ijhydene.2022.04.201
IF: 7.2
2022-01-01
International Journal of Hydrogen Energy
Abstract:Micro-combustor is a portable power device that can provide energy efficiently, heat recirculating is considered to be an important factor affecting the combustion process. For enhancing the heat recirculating and improving the combustion stability, we proposed a heat-recirculating micro-combustor embedded with porous media, and the numerical simulation was carried out by CFD software. In this paper, the effect of porous media materials, thickness and inlet conditions (equivalence ratio, inlet velocity) on the temperature distribution and exhaust species in the micro combustor are investigated. The results showed that compared with the micro combustor without embedded porous media (MCNPM), micro-combustor embedded with porous media (MCEPM) can improve the temperature uniformity distribution in the radial direction and strengthen the preheating capacity. However, it is found that the embedding thickness of porous media should be reasonably arranged. Setting the thickness of porous media to 15 mm, the combustor can obtain excellent comprehensive capacity of steady combustion and heat recirculating. Compared the thermal performance of Al2O3, SiC, and ZrO2 porous media materials, indicating that SiC due to its strong thermal conductivity, its combustion stabilization and heat recirculating capacity are obviously better than that of Al(2)O(3 )and ZrO2. With the porous media embedded in the micro combustor, the combustion has a tempering limit of more than 10 m/s, and the flame is blown out of the porous media area over 100 m/s. The reasonable equivalence ratio of CH4/air combustion should be controlled within the range of 0.1-0.5, and "super-enthalpy combustion " can be realized. (C) 2022 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.