Abstract:Natural gas, known for its high combustion efficiency and low CO 2 emissions, is experiencing a significant increase in both market share and application range. Despite these advantages, there are also challenges emerged during the combustion process, including occurrence of high flame temperature, difficulty in controlling nitrogen oxide emissions, combustion instability, and a tendency to backfire. To address these issues and achieve clean and stable burning, a novel 14MW water-cooled pre-mixed burner has been developed. In-depth simulations are conducted to assess the impact of various structural and operating parameters on combustion and pollutant emission characteristics. Results indicate that the combustion temperature follows a "W" shape with height of the low cooling component while its width governs combustion stability. Gas inlet spacing influences the flame center position and anti-backfire performance. The flare angle of gas channels determines the minimum ignition energy of the mixed gas fuel which affects ignition point and flame center position. Although large height of high cooling component contributes to low NO x emissions at the gas outlet, the resultant low temperature is undesirable for combustion stability. Further examinations of operating parameters through simulations reveal that combustion temperature initially decreases and then increases with excess air coefficient, while a significant decrease is noted with lower operating load. The premixed water-cooled technology could achieve low-NO x emissions to 2.89 mg·Nm -3 with the combustion temperature controlled at 1642K. This study provides valuable data for the design of low-NO x gas burners, serving as a reference for achieving clean and stable combustion of gas fuel.

Premixed Combustion of Natural Gas in a Gradually-Varied Porous Medium

Experimental research on premixed combustion in gradually-varied porous media

Stability of flames in the gradually-varied porous media

Experimental Studies of the Startup Characteristics of Premixed Combustion of Natural Gas in the Gradually-Varied Porous Media

Combustion and Heat Transfer of Premixed Natural Gas in a Porous Media Burner

Investigation on Premixed Combustion in Porous Medium Burner

Characterization on Ignition and Volatile Combustion of Dispersed Coal Particle Streams: in Situ Diagnostics and Transient Modeling

Experimental and Numerical Study on the Combustion Characteristics of Premixed Methane/Air in Porous Media Burner

Effects of Reactant Injection Conditions on Diffusion Combustion of Natural Gas in a Laboratory-scale Combustor

Temperature Profiles of Porous Media Combustor with Reciprocating Flow System

Numerical Studies of a Water-cooled Premixed Burner for Low NO x Combustion of Natural Gas

Transient Combustion Characteristics of Methane-Hydrogen Mixtures in Porous Media Burner

Experimental study of industrial low nitrogen porous media burner

Experimental investigation on dynamic characteristics of methane/air combustion in double‐layer pellets porous media

Experimental investigation on flame stability and emissions of lean premixed methane–air combustion in a developed divergent porous burner

Low-Calorific Gas Combustion in A Two-Layer Porous Burner

Performance Evaluation of Low-Concentration Methane Combustion in a Four-Layer Gradually-Varied Porous Burner

Experimental research on gas/solid temperature distribution in porous media premixed combustion

Study of the Semi-premixed Combustion Mixed Characteristics of a Reciprocal Porous Medium Heater

Combustion Characteristics of Low Calorific Gas in Reciprocal Flow Porous Media Burner

Porous medium burner for gas fuel