Abstract:The addition of a spark plug in place of the original fuel injector and fumigating natural gas (NG) inside the intake manifold is an economical way to convert heavy-duty diesel engines to NG sparkignition (SI) operation. The literature shows that, when compared to a conventional SI engine combustion chamber, the different in-cylinder flow motion, turbulence intensity distribution, and interaction of propagating flame with chamber boundaries in these converted engines produce distinctive combustion stages. As the current understanding of how these combustion stages affect the engine performance is limited, this study used a triple-Wiebe combustion model to determine the effect of spark timing (ST) on the phasing and mass fraction of each combustion stage, at lean operation (phi = 0.73) and low engine speed (N = 900 rpm). Specifically, the first Wiebe function was associated with the fast burn inside the piston bowl, the second Wiebe function was related to the slower burning process inside the squish region, and the third Wiebe function described the late oxidation of the fuel trapped inside the various crevices. The results show that advancing the ST advanced the combustion phasing of the bowl and squish burn stages, but not the end of the squish burn. Further, there was an overlap between the bowl burn and squish burn, irrespective of the ST, but advancing the ST reduced the overlap and increased the fuel fraction consumed inside the squish. As a larger fraction of fuel burning inside the squish under less optimal conditions would affect the engine efficiency and emissions, a combustion model, such as the one presented in this work, can provide key information for heavy-duty NG engine development and optimization if the phasing and the fraction of the total energy released during each combustion stage are known.

Experimental Studies of the Startup Characteristics of Premixed Combustion of Natural Gas in the Gradually-Varied Porous Media

Methodology to Separate the Two Burn Stages of Natural-Gas Lean Premixed-Combustion Inside a Diesel Geometry

An Experimental Investigation of Early Flame Development in an Optical Spark Ignition Engine Fueled with Natural Gas

Effect of Spark Timing on the Combustion Stages Seen in a Heavy-Duty Compression-Ignition Engine Retrofitted to Natural Gas Spark-Ignition Operation

Premixed Combustion of Natural Gas in a Gradually-Varied Porous Medium

Experimental research on premixed combustion in gradually-varied porous media

An Experimental Study of the Combustion Process in a Natural-Gas Spark-Ignition Engine

Stability of flames in the gradually-varied porous media

Effects of Reactant Injection Conditions on Diffusion Combustion of Natural Gas in a Laboratory-scale Combustor

Combustion and Heat Transfer of Premixed Natural Gas in a Porous Media Burner

Startup and Combustible Limit of Porous Medium Built-in Swiss-roll Burner

Experimental Study on Temperature Variation in a Porous Inert Media Burner for Premixed Methane Air Combustion

Research on pollutant emissions of catalytic combustion burner of natural gas start-up

Experimental investigation on dynamic characteristics of methane/air combustion in double‐layer pellets porous media

Experimental investigation on flame stability and emissions of lean premixed methane–air combustion in a developed divergent porous burner

Influence of Mixture Gas Conditions on the Laminar Combustion Characteristics of Natural Gas

Experimental and Numerical Study on the Combustion Characteristics of Premixed Methane/Air in Porous Media Burner

Numerical Studies of a Water-cooled Premixed Burner for Low NOx Combustion of Natural Gas

Numerical Studies of a Water-cooled Premixed Burner for Low NO x Combustion of Natural Gas

Experimental Study on the Combustion Characteristics of Ultralow-Concentration Methane in Divergent Porous Media Burner

Combustion characteristics of ignition processes for lean premixed swirling combustor under visual conditions