Abstract:Heat recirculation is crucial to sustaining and stabilizing flames in micro-combustion in which a strong thermal coupling between the combustor wall and gas mixture exists through thermal conduction. Filtration combustion, on the other hand, is able to recirculate heat through the solid matrix to the unburned gas mixture, representing a promising potential to further enhance heat recirculation, if applied in micro-combustion. A numerical study on heat recirculation in premixed H2/air filtration combustion in a planar micro-combustor with the channel height of H = 1mm is carried out. Thermal non-equilibrium between the gas mixture and solid matrix is considered in the 2D numerical model. A parametric study is undertaken to examine the effects of key parameters on the two pathways of heat recirculation in the porous micro-combustor, they are, heat conduction in the combustor wall and conduction and radiation through the solid matrix. The porous micro-combustor has the low-velocity extinction limits as low as ∼0.2m/s and the blowout limits in terms of critical equivalence ratios increase with increasing inlet flow velocity. Flame position and wall temperature are greatly influenced by the porosity (ɛ) and solid matrix thermal conductivity (ks) of the porous medium, but interestingly, the flame temperature seems unaffected within the velocity range studied. Upon quantifying the two pathways of heat recirculation, it is found that convective heat exchange between the gas mixture and solid matrix plays the dominant role, while thermal conduction in the combustor wall the secondary role in preheating the gas mixture. The gas-to-solid convection efficiency (ηg-s) increases with the decrease of ɛ or equivalence ratio (Φ), and the increase of ks. In contrast, the gas-to-wall convection efficiency (ηg-w) increases with the increase of ɛ or Φ. Careful selection of the wall material is important to ensure efficient heat recirculation through the combustor wall.

Numerical simulation and theoretical analysis of premixed low-velocity filtration combustion

Numerical Simulation and Theoretical Analysis of Low-Velocity Filtration Combustion of Lean Mixture

Characteristic Analysis of Low-Velocity Gas Filtration Combustion in an Inert Packed Bed

Numerical Simulation of Laminar Premixed Combustion in a Porous Burner

Approximate Solutions of Lean Premixed Combustion in Porous Media with Reciprocating Flow

Numerical Investigation of Premixed Combustion in Porous Media

Theoretical analysis of superadiabatic combustion for non-stationary filtration combustion by excess enthalpy function

Experimental and Numerical Study on the Lean Premixed Filtration Combustion of Propane/air in Porous Medium

Direct Numerical Simulations and Analysis of Three-Dimensional N-Heptane Spray Flames in a Model Swirl Combustor

Two-Temperature Approximation Analyzing The Combustion Characteristics Of Premixed Gas-Air Mixture In Inert Porous Media

Detailed Numerical Simulation of Transient Mixing and Combustion of Premixed Methane/air Mixtures in a Pre-Chamber/main-chamber System Relevant to Internal Combustion Engines

Numerical Simulation and Flame Characteristics Analysis of Non-Premixed Swirling Combustion

NUMERICAL AND EXPERIMENTAL STUDY OF PREMIXED COMBUSTION WITHIN POROUS MEDIA

Numerical Simulations And Structure Characterizations In High-Reynolds-Number Premixed Turbulent Flames

Nunerical Investigation of Premixed Combustion Within a Two-layer Porous Burner

Study on combustion characteristics of swirl premixed combustor

Numerical and Experimental Investigations on Combustion Characteristics of Premixed Lean Methane–Air in a Staggered Arrangement Burner with Discrete Cylinders

A Numerical Investigation on Characteristics of Turbulent Premixed Flame in Porous Media

Numerical Study of the Premixed Propane/air Flame Characteristics in a Partially Filled Micro Porous Combustor

Numerical study on heat recirculation in a porous micro-combustor