Abstract:The list of reacting flows in porous media applications is quite long, including porous media combustion, syngas production, and fuel cells. Porous media combustion is recognized as a cutting-edge combustion technique for increasing flammability. In this process, heat is transferred from the exothermic reaction zone to the incoming reactants through porous media. This role of porous media distinguishes reacting flows in porous media from free combustion processes. Local heat transfer, such as solid conduction, solid-solid radiation, and solid-gas convection, as well as the response behavior, are affected by the topology of the porous material. Theoretical studies indicate that continuously graded porous materials can significantly enhance the performance benefits of heat transfer. However, topology design is challenging for smooth graded porous media, and thus investigations of combustion within graded porous media are still required. In this study, we constructed a porous structure of type W/P/D/G (porosity epsilon = 0.3-0.5, hydraulic diameter d(h) = 1.33-3.86 mm) using a triply periodic minimal surface (TPMS), and a computational model of the combustion reaction in porous media was established to compare the range of flame stability within different pore types. In addition, topology gradation was achieved via TPMS to modulate the heat transfer to ensure the dependable functioning of premixed flames and improved heat recirculation. Heat transfer in the graded TPMS-based porous structure was analyzed numerically. The conclusions obtained from this study can effectively address the aforementioned challenges related to porous media burner design.

Radiation Output Efficiency and Emissions in a Porous Burner

Experimental and Numerical Study on Surface Radiation Performance of a Two-Layer Porous Burner

Experimental Study on Porous Media Burner with Top Radiator

Experimental and Numerical Study on the Combustion Characteristics of Premixed Methane/Air in Porous Media Burner

Combustion Characteristics and Radiation Performance of Premixed Hydrogen/air Combustion in a Mesoscale Divergent Porous Media Combustor

Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner

Nunerical Investigation of Premixed Combustion Within a Two-layer Porous Burner

Numerical Study of the Combustion Characteristics of an 800-1200 kW High-Power Porous Media Combustor at Atmospheric Pressure

Experimental Study on Premixed Combustion in Two-Layer Porous Media with Embedded Heat Exchangers

Low-Calorific Gas Combustion in A Two-Layer Porous Burner

Modulation of Heat Transfer in a Porous Burner Based on Triply Periodic Minimal Surface

Effect of the Cross-Section of a Porous Burner on the Combustion Stability Limit of Premixed Oxy-Methane Flames

Spectral Radiative Energy and Exergy Analysis of Oxy-Fuel Gaseous Media in One-Dimensional Furnace Cases

Partial oxidation of methane in a reciprocal flow porous burner with an external heat source

Experimental investigation on flame stability and emissions of lean premixed methane–air combustion in a developed divergent porous burner

STUDY OF HYDROGEN PRODUCTION BY METHANE-RICH COMBUSTION IN A TWO-LAYER POROUS MEDIUM

Experimental Study on Temperature Variation in a Porous Inert Media Burner for Premixed Methane Air Combustion

Numerical Simulation of Laminar Premixed Combustion in a Porous Burner

Combustion and Heat Transfer of Premixed Natural Gas in a Porous Media Burner

Heat recirculation and heat losses in porous micro-combustors: Effects of wall and porous media properties and combustor dimensions

Investigation on Premixed Combustion in Porous Medium Burner