Abstract:The list of reacting flows in porous media applications is quite long, including porous media combustion, syngas production, and fuel cells. Porous media combustion is recognized as a cutting-edge combustion technique for increasing flammability. In this process, heat is transferred from the exothermic reaction zone to the incoming reactants through porous media. This role of porous media distinguishes reacting flows in porous media from free combustion processes. Local heat transfer, such as solid conduction, solid-solid radiation, and solid-gas convection, as well as the response behavior, are affected by the topology of the porous material. Theoretical studies indicate that continuously graded porous materials can significantly enhance the performance benefits of heat transfer. However, topology design is challenging for smooth graded porous media, and thus investigations of combustion within graded porous media are still required. In this study, we constructed a porous structure of type W/P/D/G (porosity epsilon = 0.3-0.5, hydraulic diameter d(h) = 1.33-3.86 mm) using a triply periodic minimal surface (TPMS), and a computational model of the combustion reaction in porous media was established to compare the range of flame stability within different pore types. In addition, topology gradation was achieved via TPMS to modulate the heat transfer to ensure the dependable functioning of premixed flames and improved heat recirculation. Heat transfer in the graded TPMS-based porous structure was analyzed numerically. The conclusions obtained from this study can effectively address the aforementioned challenges related to porous media burner design.

Experimental Study on Porous Media Burner with Top Radiator

Experimental and Numerical Study on Surface Radiation Performance of a Two-Layer Porous Burner

Experimental and Numerical Study on the Combustion Characteristics of Premixed Methane/Air in Porous Media Burner

Experimental study of industrial low nitrogen porous media burner

Experimental Study on Premixed Combustion in Two-Layer Porous Media with Embedded Heat Exchangers

Radiation Output Efficiency and Emissions in a Porous Burner

Experimental Study on Temperature Variation in a Porous Inert Media Burner for Premixed Methane Air Combustion

Numerical Study of the Combustion Characteristics of an 800-1200 kW High-Power Porous Media Combustor at Atmospheric Pressure

Experimental Research on a Porous Media Gas-Fired Boiler

Combustion Characteristics and Radiation Performance of Premixed Hydrogen/air Combustion in a Mesoscale Divergent Porous Media Combustor

Combustion Characteristics of Low Calorific Gas in Reciprocal Flow Porous Media Burner

Experimental investigation on flame stability and emissions of lean premixed methane–air combustion in a developed divergent porous burner

Modulation of Heat Transfer in a Porous Burner Based on Triply Periodic Minimal Surface

Combustion and Heat Transfer of Premixed Natural Gas in a Porous Media Burner

Effect of the Cross-Section of a Porous Burner on the Combustion Stability Limit of Premixed Oxy-Methane Flames

Experimental Study on Flame Height and Plume Centerline Temperature Decay Power Index for a Porous Gas Burner Fire

Low-Calorific Gas Combustion in A Two-Layer Porous Burner

Numerical Study on the Characteristics of Methane Hedging Combustion in a Heat Cycle Porous Media Burner

Study on optimization characteristics of methanol combustion cooker based on porous media

Experimental research on gas/solid temperature distribution in porous media premixed combustion

Experimental Study on the Combustion Characteristics of Ultralow-Concentration Methane in Divergent Porous Media Burner