Abstract:Ammonia is being considered as a promising zero carbon fuel due to its unique properties, while its combustion still poses challenges in term of instability and higher nitrogen oxides (NO x ) emissions. In this study, the co-combustion stability of ammonia/methane with air under lean burn condition is experimentally investigated using a silicon carbide (SiC) ceramic foam burner with a two-layer structure stabilizing the flame. The influences of different operating parameters (methane fraction ω , equivalence ratio φ , and flow velocity V ) on the co-combustion flame temperature and emissions are analyzed. The results indicate that the lean stable co-combustion of ammonia/methane with air can be achieved in two-layer ceramic foam burner, with its lower limit extending to φ = 0.5, even for the pure ammonia at specific operating conditions. Notably, the nitric oxide (NO) emissions decrease significantly as the equivalence ratio increases, particularly with a rise in methane fraction. The reduction can reach as low as 843 ppm with φ increasing to 0.9, further reducing to an ultra-low level of less than 150 ppm at φ = 1.3, significantly lower than those of traditional free flame burners. Carbon monoxide (CO) emissions remain at ultra-low levels, indicating the excellent co-combustion efficiency of ammonia/methane-air in the porous burner. An optimal co-combustion region with lower NO and CO emissions were conclusively identified. These findings demonstrate the effectiveness of porous media combustion in improving the co-combustion stability of ammonia/methane and reducing NO emissions, thereby helping to develop the porous burners of ammonia-based fuel and promoting its clean utilization for realizing carbon neutrality.

Study on optimization characteristics of methanol combustion cooker based on porous media

Numerical analysis of the effect of swirl angle and fuel equivalence ratio on the methanol combustion characteristics in a swirl burner

Experimental and Numerical Study on the Combustion Characteristics of Premixed Methane/Air in Porous Media Burner

Numerical Simulation of Methane Combustion in Two-Layer Porous Media Under Oxy-Fuel Condition

Experimental Study on the Combustion Characteristics of Ultralow-Concentration Methane in Divergent Porous Media Burner

Experimental investigation on flame stability and emissions of lean premixed methane–air combustion in a developed divergent porous burner

A comparison of the activity of the sympathoadrenal and adrenocortical system under inhalation anesthesia techniques.

Numerical Study on the Characteristics of Methane Hedging Combustion in a Heat Cycle Porous Media Burner

Combustion and thermal performance of a novel preheated miniature combustor with a flame holder and various porous medium materials

Performance Evaluation of Low-Concentration Methane Combustion in a Four-Layer Gradually-Varied Porous Burner

Experimental study on the premixed lean-burn in alumina particles based porous burner

Experimental investigation on dynamic characteristics of methane/air combustion in double‐layer pellets porous media

Experimental Study on Premixed Combustion in Two-Layer Porous Media with Embedded Heat Exchangers

Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner

Methane/Air Fuel-Rich Combustion in a Catalyst Enhanced Two-Layer Porous Media Burner

Elimination of Perinatal Hepatitis B: Providing the First Vaccine Dose Within 24 Hours of Birth

Numerical and Experimental Investigations on Combustion Characteristics of Premixed Lean Methane–Air in a Staggered Arrangement Burner with Discrete Cylinders

Transient Combustion Characteristics of Methane-Hydrogen Mixtures in Porous Media Burner

Investigation on Premixed Combustion in Porous Medium Burner

Improving Combustion Technology for Cooking Activities for Pollutant Emission Reduction and Carbon Neutrality

Stable lean co-combustion of ammonia/methane with air in a porous burner