Abstract:The horizontal bias burner was a high efficiency and low NOx emission pulverized coal burner, but the burnout of the nozzle and the jam and abrasion in the basing channel prevented its applying widely. In the paper, both cold model test and numerical simulation were carried out on the horizontal bias burner for the causes and the improvement measures. It was found that there was a high flow ratio between the rich and lean sides and visible circumfluence zones existed at the downstream of all vanes, which were explained to be the causes of the troubles. Base on this, replacing the first vane by an edgy and cutting notch on other vanes with some optimization of the dimensions as the improved measures were presented. The results of the test and simulation on the improved horizontal bias burner showed that the proper flow ratio between the rich and lean sides and coal-air ratio of the rich side be acquired and the circumfluence zone be eliminated on the whole.

EXPERIMENTAL AND NUMERICAL STUDY ON THE IMPROVEMENT OF THE VANES OF THE HORIZONTAL BIAS BURNER