Abstract:The objective of this study is to investigate the effect of local wall thinning on the plastic limit load of modified 9Cr-1Mo steel pipe with existing creep damage based on the plastic limit load concept under high temperature. The creep damage is obtained from the Liu-Murakami creep model. A modified Ramberg-Osgood model is derived by using the relationship among the hardness, the creep damage, the yield strength and the ultimate tensile strength at high temperature to characterize the material deterioration during the creep process, where the non-uniform distribution of the material deterioration caused by the stress levels is considered. Orthogonal analysis for pipes with different type of defect under multi-loading systems are performed by using finite element method. The failure modes for pipes at limit state are revealed and the effect of local wall thinning on the plastic limit load of pipe with existing creep damage is presented. The regression formulae of the rupture time and the plastic limit load ratios for the pipes with different defect ratios and load combination ratios are established based on the numerical results. The limit loads for pipe with specified local wall thinning ratios after a period of time at high temperature can be determined conveniently through the regression formulae. (C) 2017 Elsevier Ltd. All rights reserved.

Plastic Collapse Analysis of Defective Pipelines under Multi-Loading Systems

Plastic Limit Load Analysis of Defective Pipelines

Practical Computation of the Plastic Collapse Limit of Defective Pipelines under Complex Loadings

Plastic Limit Analysis of Defective Pipelines under Complex Loads

On the Limit Analysis of Defective Pipelines under Complex Loadings

Plastic Collapse Analysis of Thin-Walled Pipes Based on Unified Yield Criterion

Plastic Limit Analysis of Pipelines with Part-Through Slots

Plastic Limit Analysis of Defective Piping Systems

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Safety analysis of pressure piping containing incomplete penetration under combined loads

Theoretical Assessment of Burst Failure of Internally Pressurized Defect-Free Pipelines with Plastic Anisotropy

On Elastic-Plastic Collapse of Subsea Pipelines under External Hydrostatic Pressure and Denting Force

Plastic Failure Analysis of Defective Pipes with Creep Damage under Multi-Loading Systems

Burst Pressure of Pipelines with Plastic Anisotropy under Combined Internal and External Pressures

Elastic Buckling of Cylindrical Pipe Linings with Variable Thickness Encased in Rigid Host Pipes

Research On Safety Assessment Method For Pressure Pipe With Incomplete Welding Defects Under Complicated Loadings

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Plastic Collapse Stresses for Pipes With Circumferential Twin Flaws Using Combination Rules

A Numerical Approach for Lower Bound Limit Analysis

Finite Element Analysis of Plastic Collapse and Crack Behavior of Steel Pressure Vessels and Piping Using XFEM