Abstract:As demand grows to replace petroleum-derived materials with more environmentally friendly materials, the use of wood in high-performance applications in the automotive industry has received increasing attention. Understanding the behaviour of wood during forming processes is an essential step towards its successful implementation in the automotive sector. This study accordingly investigates the compressive response and failure behaviour of two hardwood species (beech and birch) at different moisture and temperature levels. The experimental tests were conducted at 20, 60, 100 and 140 °C on samples with various moisture levels, ranging from completely dry to wet conditions. The stress–strain curves were analysed, and the failure modes were examined using visual observations and microscopic analyses. The results demonstrated that, when beech and birch were tested in standard laboratory conditions, the dominant mode of failure was the kink band, where the fibres buckled in an approximately sigmoidal shape. However, when the wet wood was tested at temperatures of 60 °C and above, the stress–strain curves showed long stress plateau region as well as strain hardening. We hypothesise that, at elevated moisture and temperature levels, the cell walls, promoted by the improved flexibility of the polymer network, start to fold, hence, the load stabilises or even slightly decreases. This corresponds to the plateau stage in the stress–strain curves of beech and birch. With further loading, the distance between the folds becomes rather small and compaction of the folds (or densification) apears to occur, corresponding to the observed strain–hardening stage. This hypothsis is supported by the concertina-like folds seen in the scanning electron microscope (SEM) graphs of post-tested specimens. Here, we present and discuss the effect of rays, as well as cell wall/lumen ratio, on the compression behaviour of wood, and the stability of the forming process.

Dynamic Thermo-Mechanical Analysis for the Compressive Rectangle Wood

Thermodynamic Property of Heat Treated and Compressed Larch and Poplar Wood

Delayed Elastic Strain and Set-Recovery Evaluation in High-Pressure Densified Hybrid Poplar Wood – New Assessment Considerations

Effects of High-Pressure Treatment on Poplar Wood: Density Profile, Mechanical Properties, Strength Potential Index, and Microstructure

High-strain Rate Compressive Behavior of Douglas Fir and Glubam

Analysis of Deformation Fixation of Thermally Compressed Scots Pine (pinus Sylvestris L.)

Mechanical Properties and Dimensional Stability of Poplar Wood Modified by Pre-Compression and Post-Vacuum-Thermo Treatments

Effect of Unilateral Surface Compression Technique and Heat Treatment on Industrial Application Performance of Poplar

Effects of Thermo-Hydro-mechanical Treatments on Various Physical and Mechanical Properties of Poplar (populus) Wood

Variations Between Longitudinal CompressiveRatio and PDR of Ash Wood

Multi-scale finite element simulation on large deformation behavior of wood under axial and transverse compression conditions

Effects of Compressive Deformation on Wettability and Water Uptake Behavior of Poplar

Compressive Behavior of Wood-based 2-D Lattice Structure under Multivariable Analysis

Characterization of hygrothermal, gas pressure and stress characteristics for poplar wood during unilateral surface densification

Mechanical properties of compression wood from two fast-growth wood species pretreated with alkaline sulfites

A novel constitutive model for the porosity related super-large deformation and anisotropic behavior of wood under perpendicular to grain compression

Integrated approach for improving mechanical and high-temperature properties of fast-growing poplar wood using lignin-controlled treatment combined with densification

Recovery of Thermally Compressed Scots Pine (pinus Sylvestris L.) Wood

Effect of Hydrothermal-Microwave Softened Treatment on Longitudinal Compressing and Bending Ash Wood

The compressive behaviour of beech and birch at different moisture and temperature conditions along the grain

Rheological Behavior of Larch Timber During Conventional Drying