Abstract:As a green and low-carbon natural polymer material, wood has always been popular in engineering applications owing to its excellent physical and mechanical properties. In this study, compression tests in conjunction with in situ test methods (DIC method) were used to investigate the compression mechanism of wood samples in the longitudinal, radial, and tangential directions. The macroscopic failure modes, energy dissipation results, and variations in the strain field were analyzed. The results showed that the load–displacement curve in each grain orientation included three stages: an elasticity stage, yield stage, and strengthening stage. Both the compressive strength and elastic modulus in the longitudinal direction were significantly higher than those in the radial and tangential directions, but there was no significant difference between the radial and tangential directions. Specimens in the longitudinal direction mainly presented fiber buckling, fiber shear slippage, and fiber fracture failure; in radial directions mainly presented compression compaction of the fiber cells; and in the tangential directions presented buckling and shear failure of the laminar layers. The energy absorption in the longitudinal direction was better than in the other directions. The strain changed significantly in the loading direction in the elastic stage while the shear strain changed remarkably in the yield stage in each grain orientation. In this paper, the compression mechanical properties of larch wood in different grain orientations were studied to provide a reference for its safe application in engineering.

Rheological Behavior of Larch Timber During Conventional Drying

Theoretical and Experimental Study on Transient Measurement of Wood Thermal Properties

High-strain Rate Compressive Behavior of Douglas Fir and Glubam

Characterization and Prediction of Mechanical and Chemical Properties of Luanta Fir Wood with Vacuum Hydrothermal Treatment

Compressive Mechanical Properties of Larch Wood in Different Grain Orientations

Mechanical Properties of Dahurian Larch Wood under Cyclic Loading: Experiments and Constitutive Model

Temperature and time dependence of orthotropic viscoelastic properties of moist wood determined in tensile mode

Moisture and short-term time-dependent behavior of Norway spruce clear wood under compression perpendicular to the grain and rolling shear

Study on free shrinkage and rheological characteristics of Eucalyptus urophylla ×E. grandis during conventional drying

Optimization of measurement and calculation methods for viscoelastic creep strain and mechanical adsorption creep strain during conventional drying process of Pinus sylvestris

Effect of Growth Ring Width and Latewood Content on Selected Physical and Mechanical Properties of Plantation Japanese Larch Wood

Moisture changes and surface checking development during drying of Masson pine wood

Tension Performance of Metal-Plate Connected Joints of Chinese Larch Dimension Lumber

Measurements of the mechanical properties of larch at elevated and high temperature under nitrogen conditions

Rheological behavior of wood in stress relaxation under compression

Effect of thermo-vacuum modification on selected chemical, physical, and mechanical properties of Siberian larch (Larix sibirica L.) wood

Creep Behavior of Laminated Veneer Lumber from Poplar under Cyclic Humidity Changes

Viscoelastic properties of green wood across the grain measured by harmonic tests in the range of 0\degree C to 95\degree C. Hardwood vs. softwood and normal wood vs. reaction wood

Evaluation of the Shear Performance of Douglas-Fir Wood at Elevated Temperatures

Tensile Properties of Finger-Jointed Lumber under High-Temperature and Oxygen-Free Conditions

Short-term hygro-mechanical behaviour of lime wood ( Tilia cordata ) in principal anatomical directions