Abstract:The mechanical properties of Chinese traditional timber buildings with the type of post-and-lintel construction were studied with experimental and theoretical method. There are mainly two types of mortise-tenon joints in the type of post-and-lintel construction which are the Mantou mortise-tenon joint and the Zhi mortise-tenon joint at the foot of short column respectively. In this article, two scaled Mantou mortise-tenon joint specimens and three scaled Zhi mortise-tenon joint specimens designed according to the actual configurations were tested and analyzed. The failure modes, hysteresis curves, skeleton curves, and in-plane rotational rigidity of these two types of mortise-tenon joints under low cyclic loading were obtained. The results show that the hysteretic curves of the Mantou mortise-tenon joints appear to be Z shape and have obvious pinch effects, but the hysteresis curves of the Zhi mortise-tenon joints at the foot of short column appear to be reverse S shape and are not plump. During the process of the test, these two types of mortise-tenon joints orderly pass through elastic stage, yield stage, and failure stage. Furthermore, with the consideration of the nonlinear contact influence of the mortise-tenon joint and the nonlinear stress-strain behavior of the timber material, the mechanical properties of these two types of mortise-tenon joints were analyzed by ANSYS software. The theoretical results agreed well with the experimental results. The relationship of the elastic in-plane rotational rigidity, elastic out-of-plane rotational rigidity, and elastic torsional rigidity of these two types of mortise-tenon joints were achieved, the ratio of these three dimensional rotation rigidity is about 4.64:1.00:0.78 for the Mantou mortise-tenon joints, and is about 0.97:1.00:0.74 for the Zhi mortise-tenon joints at the foot of short column. The results can provide theoretical base for structural analysis and repair design of the Chinese traditional timber buildings with the type of post-and-lintel construction.

Tension Performance of Metal-Plate Connected Joints of Chinese Larch Dimension Lumber

Experimental Investigation and Evaluation of Metal-Plate-connected Laminated Bamboo Lumber Joints

Mechanical Performance of Toothed Metal-Plate Connected Glubam Joints

Effect of Metal-Plate Connector on Tension Properties of Metal-Plate Connected Dahurian Larch Lumber Joints

Bending Performance of Nail-Laminated Bamboo-Timber Panels Made with Glubam and Fast-Grown Plantation Chinese Fir

Experimental study on mechanical behavior of glue laminated bamboo Ⅰ-joists

Mechanical Behavior of Glued Laminated Bamboo Moment-Resisting Connections

The Flexural Behavior of Cross Laminated Bamboo and Timber (CLBT) and Cross Laminated Timber (CLT) Beams

The Off-Axis Embedment Performance of Bamboo Panels Used for Glubam Structures

Compressive Mechanical Properties of Larch Wood in Different Grain Orientations

Testing and Evaluation of Metal-Plate-Connected Wood Truss Joints

Experimental testing of spliced glulam joints for large-span timber structures

In-plane testing and hysteretic modeling of steel-spline cross-laminated timber diaphragm connection with self-tapping screws

Mechanical Properties of Dahurian Larch Wood under Cyclic Loading: Experiments and Constitutive Model

Experimental and numerical analysis of tensile properties in steel-timber bonded-screwed hybrid single-lap joints with different drilling directions

Characterizing engineering performance of bamboo-wood composite cross-laminated timber made from bamboo mat-curtain panel and hem-fir lumber

Axial load-deformation behavior and fracture characteristics of bolted steel to laminated timber and glubam connections

Effects of Moisture Content on Lap-Shear, Bending, and Tensile Strength of Lap-Jointed and Finger-Jointed Southern Pine Using Phenol Resorcinol Formaldehyde and Melamine Urea Formaldehyde

Research on Mechanical Properties of Main Joints of Chinese Traditional Timber Buildings with the Type of Post-and-Lintel Construction

Structural performance of laminated-bamboo lumber nailed connection

Study on Joint Model Simplification for Finite Element Analysis of Bamboo/Wood-Oriented Strand Board Furniture