Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Experimental and numerical analysis of tensile properties in steel-timber bonded-screwed hybrid single-lap joints with different drilling directions

Experimental and Numerical Investigations on the Hybrid Dowel and Bonding Steel Plate Joints for Timber Structures

Connections Used for Cold-Formed Steel Frame Shear Walls Sheathed with Engineered Bamboo Panels

Experimental Investigation and Evaluation of Metal-Plate-connected Laminated Bamboo Lumber Joints

Strengthening of Composite T-joints Using Ø 0.11 Mm Z-pins Via an Ultrasound-Guided Insertion Process

Mechanical Performance of Toothed Metal-Plate Connected Glubam Joints

Influence of the joining technique on the structural behaviour of hybrid timber-steel cross-sections

Experimental and finite element analysis of flexural performance of steel-timber composite beams connected by hybrid-anchored screws

Experimental Study of Bolted Glued Timber-to-timber Joints

In-plane testing and hysteretic modeling of steel-spline cross-laminated timber diaphragm connection with self-tapping screws

Experimental testing of spliced glulam joints for large-span timber structures

Strengthening Single-Bolt Timber Joints with Externally Bonded CFRP Composites

Axial load-deformation behavior and fracture characteristics of bolted steel to laminated timber and glubam connections

Mechanical properties of timber-concrete connections with steel tube connectors

Experimental Investigation on Innovative Connections for Timber–concrete Composite Systems

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Mechanical properties of glulam moment-resisting joints reinforced by inclined self-tapping screws

Experimental and Nonlinear Analytical Studies on Prefabricated Timber–Concrete Composite Structures with Crossed Inclined Coach Screw Connections

Experimental Study on Structural Performance of Wood-Steel-Wood Bolted Joints

Research on flexural performance of glulam spliced joints connected by self-tapping screws in different arrangements

Study on geometric optimization for new type of steel mortise and tenon joint based on performance