Experimental Study of Bolted Glued Timber-to-timber Joints

XU Deliang,LIU Weiqing,ZHOU Ding,XI Aifeng

DOI: https://doi.org/10.14006/j.jzjgxb.2011.07.014

2011-01-01

Abstract:Three groups of 9 single-bolted connections and four groups of 20 multi-bolted connections were tested to investigate their mechanical performance.The bearing capacity of single-bolted and multi-bolted glued timber-to-timber connections subjected to a load parallel to grain was studied.The failure modes and failure mechanism of bolted connections were discussed in detail.For the single-bolted glued timber-to-timber connections,it is shown that the failure modes,bearing capacity,stiffness and ductility are related to the thickness ratio of the side members of the structure.When the thickness ratio of the side member is equal to 4.375,the failure modes is type Ⅲ.In such a case,the ductility is the best.For multi-bolted timber-to-timber connections,it shows that the failure modes,bearing capacity,stiffness and ductility are relevant to the bolt number in a row and the row number of bolts.The bearing capacity of the joint is relevant to the effective number of bolts rather than the total number of bolts.In all of the multi-row arrangements,the two-row cracks failure mode where the bolts are uniformly loaded exhibits the highest ductility.