Bolted steel to laminated timber and glubam connections: Axial behavior and finite-element modeling
Da Shi,Haonan Huang,Ning Li,Yiwei Liu,Cristoforo Demartino
DOI: https://doi.org/10.1016/j.ijmecsci.2023.108364
IF: 7.3
2023-04-13
International Journal of Mechanical Sciences
Abstract:This study aims to characterize the axial monotonic and cyclic tensile behavior of bolted steel connections to laminated timber and bamboo, using slotted-in steel plates, and to provide a high-fidelity simulation using finite-element modelling. Forty-eight experimental tests were conducted, including eight different configurations, varying in material (Laminated Veneer Lumber (LVL) and Glued Laminated Bamboo (glubam)), number of bolts, and diameter of bolts, under tension, both monotonic and cyclic (three repetitions). The force and displacement were recorded, and used to define the initial stiffness, yielding strength, ultimate strength, ductility, viscous damping, and energy dissipation. The failure modes of the connections were monitored using Digital Image Correlation (DIC) techniques. A novel high-fidelity finite-element model integrating Hill's yielding and element removal criteria was proposed to predict the mechanical performance and fracture behavior of the examined connections. The numerical simulation was validated by comparing the experimental load–displacement curves and the strain field measurements obtained with DIC. Finally, theoretical formulas for predicting the stiffness of bolted connections were proposed based on the FEM simulations.
engineering, mechanical,mechanics