Abstract:Bagasse and rice hulls ash are both waste materials. In recent years, in order to meet environmental protection, these materials have been recycled in the production of porous ceramics. A solid‐state reaction mechanism of calcined alumina and talc was used to prepare cordierite‐spinel porous ceramics. Talc was added from 30 to 60 wt% at the expense of alumina and sintered at 1400°C for 2 hours. The effect of bagasse and rice hulls ash (as a pore forming agent) on the densification parameters, cold crushing strength and pore size distribution was also studied. The phase composition (XRD) and microstructure (SEM) of sintered samples were investigated. The results showed that the main phases present in the samples are cordierite, corundum, spinel and sapphirine. In the sample with a higher amount of talc additions (60 wt%) only the formation of the cordierite and spinel phases was observed. The bulk density of the samples and the apparent porosity ranged from 1.77‐2.26 g/cm3 and 28.6‐48.21%, respectively. The cold crushing strength of the samples ranges from 13.9MPa to 36.3MPa. The microstructure of the sintered samples was observed the formation of cordierite phase, alumina phase and spinel phase in an excellent crystallization and phase arrangement. This article is protected by copyright. All rights reserved

Synthesis of Porous Cordierite Using Rice Husk As Silica Source and Pore Forming Agent

Influence of La_2O_3 on Preparation and Performance of Porous Cordierite from Rice Husk

Low-temperature preparation of porous cordierite-mullite ceramics using rice husk as silica source and pore-forming agent

Influence of Nd2O3 on Porous Cordierite Prepared from Rice Husk

In-situ synthesis and properties of porous cordierite ceramics with adjustable pore structure

Fabrication and Properties of Porous Sic-Cordierite Ceramics

Preparation of Fly Ash-Based Porous Ceramic with Alumina as the Pore-Forming Agent

Fabrication and Characterization of Porous Cordierite Ceramics Prepared from Fly Ash and Natural Minerals

Utilization of Sepiolite in the Synthesis of Porous Cordierite Ceramics

Recycling bagasse and rice hulls ash as a pore‐forming agent in the fabrication of cordierite‐spinel porous ceramics

Morphology Design of Porous Si2N2O Ceramics via Silica Poly-Hollow Microspheres

Effect of Different Aluminum Sources on the Preparation and Properties of SiC/Cordierite Composite Porous Ceramics

Fabrication and Properties of Cordierite–mullite Bonded Porous SiC Ceramics

A simple method for the preparation of cordierite ceramics with high strength and low thermal expansion coefficient

In-situ Synthesis and Properties of Cordierite-Bonded Porous SiC Membrane Supports Using Diatomite As Silicon Source

INFLUENCE OF Al2O3 ON PREPARING POROUS SILICON NITRIDE BASED CERAMIC FROM RICE HUSK

Porous Silica Ceramics with Uniform Pores from the In-Situ Foaming Process of Silica Poly-Hollow Microspheres in Inert Atmosphere

Near Net Shape Fabrication of Porous Cordierite by Combination of Foam Gel‐casting and Freeze‐drying

Facile fabrication of cordierite-based porous ceramics with magnetic properties

Formation and kinetics of porous cordierite from fly ash

Preparation of Cordierite Powder by Chemical Coprecipitation–rotation Evaporation and Solid Reaction Sintering