Abstract:Low-temperature sintering of cordierite ceramic depends on the phase transformation into cordierite and the properties depend on its microstructure. In the present work, the effect of cerium on the phase transformation and microstructure of cordierite ceramics prepared by sol-gel method is studied by X-ray diffraction (XRD), differential thermal analysis (DTA) and scanning electron microscopy (SEM) in order to lower the sintering temperature and improve the properties of cordierite ceramic with the addition of cerium. It is observed that the cerium addition obviously lowers the crystallization temperature of α-cordierite while slightly raises that of μ-cordierite. The lowest temperature for μ → α cordierite transformation, which approaches the crystallization temperature of μ-cordierite, is achieved in the sample containing 4 wt% of cerium, implying a possibility to lower the sintering temperature of cordierite ceramics. The Ce-contained ceramics show a biphasic microstructure that is dependent on sintering temperature. Sintered below 1300°C, a cordierite-CeO 2 microstructure is present; while sintered at the temperature above 1300°C, appears a cordierite-glass microstructure, of which the amount of glass phase is limited to a small extent. Since the addition of 4 wt% cerium to this MgO-Al 2 O 3 -SiO 2 system substantially enhances the densification of cordierite ceramics and lowers the sintering temperature to the level of around 1000°C, it makes the ceramics suitable for such applications, where the low-temperature sintering is required, as the substrates for electronic circuit and the catalytic supports (with oxygen storage capacity) for cleaning of automotive exhaust emissions.

Utilization of Sepiolite in the Synthesis of Porous Cordierite Ceramics

Fabrication and Characterization of Porous Cordierite Ceramics Prepared from Fly Ash and Natural Minerals

In-situ synthesis and properties of porous cordierite ceramics with adjustable pore structure

Synthesis of Porous Cordierite Using Rice Husk As Silica Source and Pore Forming Agent

Fabrication and Properties of Porous Sic-Cordierite Ceramics

Mechanism of Cordierite Formation Obtained by High Temperature Sintering Technique

Low-temperature preparation of porous cordierite-mullite ceramics using rice husk as silica source and pore-forming agent

Preparation of Cordierite Powder by Chemical Coprecipitation–rotation Evaporation and Solid Reaction Sintering

Fabrication and Properties of Cordierite–mullite Bonded Porous SiC Ceramics

Influence of Titanium Dioxide on the Microstructure and Properties of Porous Cordierite Ceramics

Preparation of macroporous cordierite monoliths via the sol-gel process accompanied by phase separation

Recycling bagasse and rice hulls ash as a pore‐forming agent in the fabrication of cordierite‐spinel porous ceramics

Effect of Cerium Addition on Phase Transformation and Microstructure of Cordierite Ceramics Prepared by Sol-Gel Method

Influence of La_2O_3 on Preparation and Performance of Porous Cordierite from Rice Husk

A simple method for the preparation of cordierite ceramics with high strength and low thermal expansion coefficient

Mechanical and microstructural properties of cordierite-bonded porous SiC ceramics processed by infiltration technique using various pore formers

Facile fabrication of cordierite-based porous ceramics with magnetic properties

Synthesis of Al2O3–SiO2–MgO ceramics with hierarchical porous structure

A Simple and Efficient Way to Prepare Porous Mullite Matrix Ceramics Via Directly Sintering SiO2-Al2O3 Microspheres

Effect of Fe2O3 addition on sintering behavior of cordierite ceramic obtained by solid-state sintering method

Sintering behavior of alumina rich cordierite porous ceramics