Abstract:Mordenite composite membranes were prepared by means of coating a porous α-alumina support with nanosized mordenite seeds followed by hydrothermal crystallization. A systematic investigation was performed on the influence of several factors such as ageing of the reaction mixture, alkalinity, salt addition and temperature on the formation of a mordenite membrane on the seeded support. The ageing of the reaction mixture reduces the growth rate of mordenite crystal along a-axis and b-axis but hardly influences the growth rate along c-axis. As a result, the boundaries between the surface crystals become a little larger with prolonging the period of ageing time. The growth rate of the mordenite crystal along individual axes increases first and then decreases with increasing concentration of sodium hydroxide. A higher alkalinity is unfavorable for the formation of a continuous mordenite membrane. The addition of salt in the reaction mixture has different effect on the growth rate of the mordenite crystal along each axis. With increasing the amount of salt, there was hardly influence on the growth rate along c-axis, whereas an obvious decline was observed in the growth rate along either a-axis or b-axis, which enlarges the boundaries between the surface crystals. The growth rate of the mordenite crystal increases more along c-axis than that along a-axis or b-axis with increasing temperature for hydrothermal crystallization. The use of a temperature as high as 473 K produces a membrane composed of bar-like crystals with larger boundaries.

Preparation of macroporous cordierite monoliths via the sol-gel process accompanied by phase separation

Preparation of Mullite Monoliths with Well-Defined Macropores and Mesostructured Skeletons Via the Sol–gel Process Accompanied by Phase Separation

Preparation and Characterization of Macroporous Mayenite Monoliths

Synthesis of Monolithic Zirconia with Macroporous Bicontinuous Structure Via Epoxide-Driven Sol–gel Process Accompanied by Phase Separation

Preparation of Macroporous Zirconia Monoliths via Sol-Gel Process Accompanied by Phase Separation

Preparation of Macroprous C12A7 Mayenite Monoliths Via a Sol-Gel Process with Nitrates As Precursors

Preparation of macroporous Li2ZrO3 monoliths via an epoxide-mediated sol–gel process accompanied by phase separation

Preparation of macroporous zirconia monoliths from ionic precursors via an epoxide-mediated sol-gel process accompanied by phase separation

Macroporous Sio2 Monoliths Prepared Via Sol-Gel Process Accompanied by Phase Separation

Facile synthesis of monolithic mayenite with well-defined macropores via an epoxide-mediated sol–gel process accompanied by phase separation

Preparation of Mordenite Composite Membranes with Seeding

Preparation of Macroporous Transition Metal Hydroxide Monoliths Via a Sol-Gel Process Accompanied by Phase Separation

Sol–gel Synthesis of Macroporous Barium Zirconate Monoliths from Ionic Precursors Via a Phase Separation Route

Macroporous MgO Monoliths Prepared by Sol–gel Process with Phase Separation

Microstructural Development on Sol–gel Derived Cordierite Ceramics Doped B2O3 and P2O5

High Temperature Structure Evolution of Macroporous SiOC Ceramics Prepared by a Sol–gel Method

Preparation of a Hierarchically Porous AlPO4monolith Via an Epoxide-Mediated Sol–gel Process Accompanied by Phase Separation

Spontaneous Preparation Of Hierarchically Porous Silica Monoliths With Uniform Spherical Mesopores Confined In A Well-Defined Macroporous Framework

Crystallization behavior and properties of cordierite synthesized by sol-gel technique and hydrothermal treatment

Preparation of Porous YSZ Monoliths via Sol-gel Process Accompanied by Phase Separation

Utilization of Sepiolite in the Synthesis of Porous Cordierite Ceramics