Abstract:Experiments of CO2 capture and sorbent regeneration characteristics of limestone, dolomite, and CaO∕Ca12Al14O33 at high temperature were investigated in a thermogravimetric analyzer (TGA) and a fluidized bed reactor. The effect of reactivity decay of limestone, dolomite, and CaO∕Ca12Al14O33 sorbents on CO2 capture and sorbent regeneration processes was studied. The experimental results indicated that the operation time of high efficient CO2 capture stage declined continuously with increasing of the cyclic number due to the loss of the sorbent activity, and the final CO2 capture efficiency would remain nearly constant, due to the sorbent already reaching the final residual capture capacity. After the CO2 capture step, the Ca-based sorbents need to be regenerated to be used for a subsequent cycle, and the multiple calcination processes of Ca-based sorbent under different calcination conditions are studied and discussed. Reactivity loss of limestone, dolomite and CaO∕Ca12Al14O33 sorbents from a fluidized bed reactor at both mild and severe calcination conditions was compared with the TGA data. At mild calcination conditions, TGA results of sorbent reactivity loss were similar to the experimental results of fluidized bed reactor for three sorbents at 850°C calcination temperature, and this indicated that TGA experimental results can be used as a reference to predict sorbent reactivity loss behavior in fluidized bed reactor. At severe calcination condition, sorbent reactivity loss behavior for limestone and dolomite from TGA compare well with the result from a fluidized bed reactor.

A simplified technique for measurement of sorbent reactivity for use in circulating fluidized bed combustors

Sorbent Performance under FBC Conditions -- A Thermochemical Analysis

Measurement and Numerical Simulation of Ultrafine Particle Size Distribution in the Early Stage of High-Sodium Lignite Combustion

Sorbent performance under FBC conditions-a thermochemical analysis

Investigation of a Novel Composite Sorbent for Improved Sorption Characteristic

Measurements and Modelling of Oxy-Fuel Coal Combustion

Distributed pore model for sulfation of calcium-based sorbent

Experimental Study on the Reuse of Spent Rapidly Hydrated Sorbent for Circulating Fluidized Bed Flue Gas Desulfurization.

CO2 Capture from Flue Gases Using Three Ca-Based Sorbents in a Fluidized Bed Reactor

Limestone Attrition and Product Layer Development During Fluidized Bed Sulfation

Effect of characteristic of sorbents on their sulfur capture capability at a fluidized bed condition

Experimental Study of the Mechanisms of Steam Reactivation of Unreacted Calcium-Based Sorbent for Flue Gas Desulphurisation

Kinetic model for desulfurization at medium temperature using hydrated absorbent

Experiments on H2S sorption by limestone in a fluidized bed gasifier

Effects Of The Limestone Particle Size On The Sulfation Reactivity At Low So2 Concentrations Using A Lc-Tga

Numerical and Experimental Investigation of the Effects of Impinging Streams to Enhance Ca-based Sorbent Capture of SO2

So2 Capture and Attrition Characteristics of A Cao/Bio-Based Sorbent

Experimental Study on Calcination and Fragmentation Characteristics of Limestone in Fluidized Bed

Characteristics and Reactivity of Rapidly Hydrated Sorbent for Semidry Flue Gas Desulfurization

Experimental study of steam reactivation of calcium-based sorbent for dry FGD process

Experimental Study On Medium Temperature Dry Flue Gas Desulphurization By Using Active Sorbent In Circulating Fludized Bed