Abstract:Bed joint reinforced repointing is a retrofitting technique for unreinforced masonry structures that is commonly applied in the Netherlands to repair settlement-induced damage. Using this technique, the bed joints of masonry walls are reinforced with steel rebars that are embedded in a high strength repair mortar. Due to the increase of induced seismic events in the northern part of the Netherlands, an experimental study was carried out at Delft University of Technology to investigate the performance of this retrofitting technique for combined settlement and seismic loading. This paper aims to simulate the experimental results, with a focus on the comparison of different finite element modelling approaches for studying both un-strengthened and strengthened full-scale tested walls. To that end, three different models are investigated – comprising both macro (continuum) and simplified and detailed micro (brick-to-brick) modelling approaches. The bricks and mortar joints are modelled as one homogenous continuum in the macro model, whereas in the two brick-to-brick models these structural components are modelled separately, with the detailed model including interface elements to simulate the brick–mortar bonds. Nonlinear pushover analyses are subsequently carried out using all three modelling approaches, for both monotonic and cyclic loading cases. Based on these analyses, the detailed brick-to-brick model was found unsuitable to simulate the strengthened wall because cracks in the model mainly occur in the form of opening of the brick–mortar bond interfaces, while smeared cracking in the plane stress elements of the mortar joints is very limited. Similarly, the continuum damage model was found to be inaccurate when pre-existing damage in the experiment needed to be taken into account. The continuum damage model also showed lower axial stresses in the rebars, compared with the simplified brick-to-brick model, as the former does not allow for the direct assignment of material properties for the high strength repair mortar in the strengthened joints.

Experimental Study on Seismic Behavior of Brick Walls Strengthened with Embedded Bars

Experimental Study on Low Strength Brick Masonry Wall Strengthened with Self-compacting Concrete Wall

Simulation Of Collapse Process Of Masonry Walls Based On Expanded Discrete Element Method

Experimental Study of Cement Mortar-Steel Fiber Reinforced Rammed Earth Wall

Quasi-static, Cyclic Loading Tests of RAC Brick Masonry Walls Strengthened by Basalt Textile Reinforced Concrete

Experimental Study of Masonry Walls Strengthened with Cfrp

Experimental Study on the Seismic Performance of Brick Walls Strengthened by Small-Spaced Reinforced-Concrete–Masonry Composite Columns

In-Plane Strengthening Effect of Prefabricated Concrete Walls on Masonry Structures: Shaking Table Test

Experimental Study on Lateral Resistance Behavior of Small Concrete Hollow Block Wall with Different Constructional Measures

MECHANICAL BEHAVIOR OF MASONRY WALLS STRENGTHENED WITH CFRP

Experimental study on the seismic performance of masonry wall reinforced by cement mortar and polypropylene band

Experimental and Numerical Study on the Seismic Performance of Prefabricated Reinforced Masonry Shear Walls

EXPERIMENTAL INVESTIGATION ON CONCRETE PERFORATED BRICK WALL SHINKAGE AT DIFFERENT AGES

Experimental and numerical investigation on the seismic behaviors of RC shear walls with multiple post-openings before and after strengthening by steel plates

Seismic Performance of Reinforced Concrete Squat Walls with Embedded Cold-Formed and Thin Walled Steel Truss

A Static Nonlinear Analysis of Confined Brickmasonry Walls in a Multistory Building with a Large-Bay

Seismic Performance of Unreinforced Masonry Walls with Various Retrofitting Methods

Experimental Study on Both Sides Strengthening of Low-reinforced Shear Wall

Comparative numerical study to simulate masonry with bed joint reinforced repointing

Experimental study on seismic performance of new-type fabricated shear wall with mortar connection

Analysis of an example of old masonry residence strengthenedby external prefabricated reinforced concrete shear walls