Abstract:The large superconducting magnet are widely used and play an important role in nuclear fusion device, high-energy accelerator, space target infrared and other forefront fields. In this paper, we design several cryogenic centrifugal compressor stages for helium refrigerator with 3.3K-11K inlet temperature, used in exhausting the low-pressure and low-temperature saturated helium steam, further producing superfluid helium and cooling the large superconducting magnet. Due to the cryogenic compressor running environment and the internal structure, about 30W heat leakage from impeller hubs and the end of shafts into the flow passages are unavoidable, and it is necessary to consider this heat leakage in the centrifugal compressor impeller design. Firstly, adding the heat leakage into thermodynamic process and centrifugal compressor effective formula, then adjusting the inlet and outlet design parameters according to the heat transfer rate and make the preliminarily designs of each stage of the compressor. Four different methods for varying p design condition parameters are compared by CFD simulation. The 3-D impellers are designed by the Streamline Curvature Method, and the vaneless diffusers and volutes are designed by the inlet and outlet section aerodynamic parameters. When the best design method is determined, the blade profiles are further adjusted in order to improve the stage performance. Finally, the characteristic curves under variable working conditions and the generalized stage performance curves of each stage are calculated. In this paper, we delve into a high efficiency centrifugal compressor stage design method with the consideration of heat transfer effect. In the next step, more running data will be obtained after the further experiments and the long-term operation.

Analysis of Helium Cryogenic Cycle for the Cooling of Cold Neutron Source

The performance analysis and optimization of helium cryogenic cooling system with reverse Brayton cycle for cold neutron source

Investigation Of Helium And Nitrogen Mixtures In A Pulse Tube Refrigerator

Simulation Test of Natural Circulation Precooling for Cryogenic Pump System

Thermal Dynamic Analysis for Schemes of Helium Refrigeration System

Numerical Study on the Working Performance of a G-M Cryocooler with a Mechanically Driven Displacer

Thermodynamic Analysis and Economical Evaluation of Two 310-80 K Pre-Cooling Stage Configurations for Helium Refrigeration and Liquefaction Cycle

Study on Cooling Capacity Characteristics of an Open-Cycle Joule-Thomson Cryocooler Working at Liquid Helium Temperature

Design Of Cryogenic Centrifugal Compressor Stages With Heat Transfer Considerations

Thermodynamic Analysis of Different Cold End Configurations for Mixed Mode Cryogenic Helium Plant

Status and Development Trends of Space Mechanical Refrigeration System at Liquid Helium Temperature

Thermodynamic Cycle Design of a 700W@3K Sub-Cooled Helium Refrigerator Test Facility

Design Progress of Cryogenic Hydrogen System for China Spallation Neutron Source

Application of Cryogenic Refrigerating Techniques in Cold Neutron Sources

Numerical Simulations of Sub-Atmospheric J-T Heat Exchanger for Superfluid Helium Cryogenic System

Simulation and analysis on heat leakage structure of cold compressor in large-scale refrigeration system

Design and optimization of cryogenic supercritical hydrogen storage system coupled with mixed refrigerant and gas expansion cycle

A Cryogenic Heat Exchanger With Bypass And Throttling And Its Thermodynamic Analysis

Design of Cold Neutron Source(CNS) in China Advanced Research Reactor(CARR)

Thermodynamic, Exergoeconomic and Multi-Objective Analyses of Supercritical N2O-He Recompression Brayton Cycle for a Nuclear Spacecraft Application

The investigation of thermo-economic performance for dry-cooled closed Brayton cycle coupled to nuclear microreactors using different coolants