Abstract:The large superconducting magnet are widely used and play an important role in nuclear fusion device, high-energy accelerator, space target infrared and other forefront fields. In this paper, we design several cryogenic centrifugal compressor stages for helium refrigerator with 3.3K-11K inlet temperature, used in exhausting the low-pressure and low-temperature saturated helium steam, further producing superfluid helium and cooling the large superconducting magnet. Due to the cryogenic compressor running environment and the internal structure, about 30W heat leakage from impeller hubs and the end of shafts into the flow passages are unavoidable, and it is necessary to consider this heat leakage in the centrifugal compressor impeller design. Firstly, adding the heat leakage into thermodynamic process and centrifugal compressor effective formula, then adjusting the inlet and outlet design parameters according to the heat transfer rate and make the preliminarily designs of each stage of the compressor. Four different methods for varying p design condition parameters are compared by CFD simulation. The 3-D impellers are designed by the Streamline Curvature Method, and the vaneless diffusers and volutes are designed by the inlet and outlet section aerodynamic parameters. When the best design method is determined, the blade profiles are further adjusted in order to improve the stage performance. Finally, the characteristic curves under variable working conditions and the generalized stage performance curves of each stage are calculated. In this paper, we delve into a high efficiency centrifugal compressor stage design method with the consideration of heat transfer effect. In the next step, more running data will be obtained after the further experiments and the long-term operation.

Simulation and analysis on heat leakage structure of cold compressor in large-scale refrigeration system

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Modeling and Dynamic Simulation of a Large Scale Helium Refrigerator

Study on Cooling Capacity Characteristics of an Open-Cycle Joule-Thomson Cryocooler Working at Liquid Helium Temperature

Simulation Research on Scroll Refrigeration Compressor with External Cooling

An Investigation On Simulation Of Performance Of A Hermetic Compressor Used For A Refrigerating System

Fluid-structure interaction analysis and optimization study of suction valves in small refrigeration compressors

Design Of Cryogenic Centrifugal Compressor Stages With Heat Transfer Considerations

Status and Development Trends of Space Mechanical Refrigeration System at Liquid Helium Temperature

Development of a Cryogenic Performance Experiment System for Centrifugal Cold Compressors

Experimental Study on a Floating Scroll-Type Compressor Driving a Precooled JT Cryocooler

Performance Evaluation of Cryogenic Counter-Flow Heat Exchangers with Longitudinal Conduction, Heat In-Leak and Property Variations

Performance Study on a Low-Temperature Absorption–compression Cascade Refrigeration System Driven by Low-Grade Heat

CFD Simulation and Experimental Study of Working Process of Screw Refrigeration Compressor with R134a

Development and Experimental Study of a High-Efficiency Helium Twin-Screw Compressor

INFLUENCE OF HEAT IN-LEAK, LONGITUDINAL CONDUCTION AND PROPERTY VARIATIONS ON THE PERFORMANCE OF CRYOGENIC PLATE-FIN HEAT EXCHANGERS

Thermal Analysis Model of Scroll Compressor with Clearance Leakage Based on Multiple Scale Method

Study on Performance of Scroll Compressor for Micro-Refrigeration Systems by CFD Method

Numerical Simulations of Sub-Atmospheric J-T Heat Exchanger for Superfluid Helium Cryogenic System

Numerical simulation of CO<sub>2</sub> two-stage compression refrigeration system with external intercooler

Numerical Analysis of Temperature Distribution of Motor-Refrigerant in A R32 Rotary Compressor