Abstract:The large superconducting magnet are widely used and play an important role in nuclear fusion device, high-energy accelerator, space target infrared and other forefront fields. In this paper, we design several cryogenic centrifugal compressor stages for helium refrigerator with 3.3K-11K inlet temperature, used in exhausting the low-pressure and low-temperature saturated helium steam, further producing superfluid helium and cooling the large superconducting magnet. Due to the cryogenic compressor running environment and the internal structure, about 30W heat leakage from impeller hubs and the end of shafts into the flow passages are unavoidable, and it is necessary to consider this heat leakage in the centrifugal compressor impeller design. Firstly, adding the heat leakage into thermodynamic process and centrifugal compressor effective formula, then adjusting the inlet and outlet design parameters according to the heat transfer rate and make the preliminarily designs of each stage of the compressor. Four different methods for varying p design condition parameters are compared by CFD simulation. The 3-D impellers are designed by the Streamline Curvature Method, and the vaneless diffusers and volutes are designed by the inlet and outlet section aerodynamic parameters. When the best design method is determined, the blade profiles are further adjusted in order to improve the stage performance. Finally, the characteristic curves under variable working conditions and the generalized stage performance curves of each stage are calculated. In this paper, we delve into a high efficiency centrifugal compressor stage design method with the consideration of heat transfer effect. In the next step, more running data will be obtained after the further experiments and the long-term operation.

Thermodynamic Cycle Design of a 700W@3K Sub-Cooled Helium Refrigerator Test Facility

Design and Commissioning of a 700 W@3 K Sub-cooled Helium Test Facility

Investigation Of Helium And Nitrogen Mixtures In A Pulse Tube Refrigerator

Theoretical Analyses of a New Two-Stage Absorption-Transcritical Hybrid Refrigeration System

Development And Analysis Of A 4.2k G-M Refrigerator

STUDY ON A THERMOACOUSTICALLY DRIVEN PULSE TUBE REFRIGERATOR OPERATING AT 124K

Failure Modes, Effects and Criticality Analysis of a 3kw@4.5k Helium Refrigerator

Design Of Cryogenic Centrifugal Compressor Stages With Heat Transfer Considerations

Construction of a 2 Kw /4 K Helium Refrigerator for HT-7U

Development of a Cryogenic Performance Experiment System for Centrifugal Cold Compressors

Design and Preliminary Test of a Helium Cryogenic Refrigerator for the High Energy FRagment Separator of HIAF

Present Status and One Upgrading Method with A Cold Compressor of the East Sub-Cooling Helium Cryogenic System

Helium Boil-Off Experiments For A Superconducting Magnet Cryostat With Pulse Tube Cryocooler

Analysis of 1.8 K Superfluid Helium Cryogenic System for Cooling Superconducting Magnets

Design and Experimental Investigations on the Helium Circulating Cooling System Operating at Around 20 K for a 300-kvar Class HTS Dynamic Synchronous Condenser

Study on Forced Flow Cooling of Superconducting Magnet for Compact Synchrotron

Numerical Simulations of Sub-Atmospheric J-T Heat Exchanger for Superfluid Helium Cryogenic System

An Experimental Investigation on Pulse Tube Refrigeration with Mixture Fluids

Theoretical Helium Liquefaction Rate Based on the Temperature-Distributed Refrigeration Method in Regenerative Refrigerators

Numerical Simulation of 1.8 K–300 K Sub-Atmospheric Helium Heating Device

Status and Development Trends of Space Mechanical Refrigeration System at Liquid Helium Temperature