Abstract:Closed Brayton cycle can efficiently convert the fission energy of the reactor into electricity, which is an ideal energy conversion system for long life, high-power and compact space reactor. In order to ensure the safe and reliable operation of turbines, compressors and generators, the space closed Brayton cycle intends to cool bearings and generators by working fluid, such as He-Xe mixture. So the cooling will inevitably affect the cycle efficiency. In this paper, three different cooling schemes for bearings and generators were proposed for the space closed Brayton cycle. They are: (1) bypassing some gas from the compressor outlet to cool bearings and generators and joining the mainstream before the reactor inlet, (2) bypassing some gas from the compressor outlet to cool bearings and generators and joining the mainstream after the reactor outlet, and (3) setting an independent cooling loop. The influence of bleeding gas flow rate on the key components was analyzed, and the three schemes were compared. The results show that the temperature difference at hot end of recuperator, molar specific power of reactor, turbine inlet temperature and molar specific work of schemes (1) and (2) decrease with increase of bleeding ratio. The scheme (3) is not effected by bleeding ratio. For a given bleeding ratio, the increasing of compression ratio will promote the space Brayton cycle efficiency of the scheme (1) and (2) at first, then the efficiency reaches its maximum value, with further increasing of compression ratio, the efficiency will reduce. But further increasing of bleeding ratio will reduce the temperature difference at hot end of recuperator, the cycle efficiency and compression ratio can not reach the maximum when the bleeding ratio increases. Therefore, there are optimal bleeding ratio, maximum cycle efficiency and corresponding compression ratio. And the maximum cycle efficiency of scheme (1) and (2) increases first and then decreases with the increase of bleeding ratio. The scheme (1) has the highest efficiency of power generation, 21.63%, because the bypass can reduce the core heat absorption and the turbine inlet temperature is the highest. The scheme (3) has the lowest efficiency which is 19.78% with the highest molar specific power which is 0.8832kJ∙mol-1 , and this scheme can reduce the core inlet temperature and the power of recuperator. The analysis provides a reference for the cooling design of the space closed Brayton cycle in the future.

The performance analysis and optimization of helium cryogenic cooling system with reverse Brayton cycle for cold neutron source

Analysis of Helium Cryogenic Cycle for the Cooling of Cold Neutron Source

Thermal Dynamic Analysis for Schemes of Helium Refrigeration System

Numerical study on dynamic cooling performance of reverse Brayton cycle air cryocooler

Thermodynamic Analysis of Different Cold End Configurations for Mixed Mode Cryogenic Helium Plant

Energy and Exergy Analyses of a Cryogenic Reverse Brayton Cycle with Waste Heat Recovery

Thermodynamic Analysis and Optimization of Nuclear Closed Air Brayton Cycle

EFFECTS OF COOLING SCHEMES ON THE PERFORMANCE OF SPACE CLOSED BRAYTON CYCLE

Design Of Cryogenic Centrifugal Compressor Stages With Heat Transfer Considerations

Design and Analysis of Thermal Performance for Cryogenic Helium Expansion Turbine

Thermodynamic Analysis and Economical Evaluation of Two 310-80 K Pre-Cooling Stage Configurations for Helium Refrigeration and Liquefaction Cycle

Optimization of a Recompression Supercritical Nitrous Oxide and Helium Brayton Cycle for Space Nuclear System

Power Optimization of a Closed Brayton Cycle with Endo-reversible Intercooling and Regenerative Heating

Thermodynamic, Exergoeconomic and Multi-Objective Analyses of Supercritical N2O-He Recompression Brayton Cycle for a Nuclear Spacecraft Application

Developments in reverse Brayton cycle cryocooler in China

Areal Closed Intercooled Reheating Regenerated Brayton Cycle Power Optimization

Exergy Analysis of a Two-stage Cascade Precooling Equipment for Cryogenic Applications

Numerical simulation and exergy analysis of a single-stage GM cryocooler

Design and Optimal Thermal Efficiency Contrastive Analysis on Closed Brayton Cycle Systems with Different Fluids of Fluoride-Salt-cooled High-Temperature Advanced Reactor

Simulation and Optimization of Helium Liquefaction Cycle Based on Pseudo Transient Continuation Method

Transient Cooling and Operational Performance of the Cryogenic Part in Reverse Brayton Air Refrigerator