Abstract:Supercritical CO2 Brayton cycle has been studied to be used as power conversion system in many fields because of its competitive efficiency and compact structure. When applied to nuclear power systems, cycle parameters that have direct effects on cycle performances will be restricted differently under different reactor designs. At the same time, the small reactor systems based on existing technology and experience in PWR, especially the Small Modular Reactor (SMR), have been favored owing to their advantages on safety, feasibility, and economic benefit. The focus of the present work is on the performances of recuperated S-CO2 Brayton cycle applied to small PWR systems that have a relatively low range of core outlet temperature below 330 oC. The calculation model is based on the laws of thermodynamics and the cycle performance were analyzed. The results show that the inlet parameters of compressor have obvious effects on cycle efficiency due to the radical change of CO2’s thermal physical properties near the critical point. With given reactor outlet temperature and recuperator effectiveness, the cycle efficiency reduces as the compressor inlet temperature rises from 32 to 40 oC. And there exists an optimal compressor inlet pressure to achieve maximum cycle efficiency. Furthermore, this optimal inlet pressure depends on the compressor inlet temperature. It will slightly increase and the maximum cycle efficiency will decrease at elevated compressor inlet temperature. Once the compressor inlet pressure exceeds the optimal value, the influence of compressor inlet temperature on cycle efficiency decreases to negligible. Pinch point is a key consideration for S-CO2 Brayton cycle. Promotion of the recuperator effectiveness can improve the cycle efficiency, but temperature difference at the cold end of recuperator ( ΔTc ) decreases at the same time. Thus the recuperator effectiveness and cycle efficiency has upper limitations to avoid the pinch point. Cycle efficiency shows two extremums according to compressor inlet pressure for given ΔTc . However, the latter situation is not suitable for practical engineering on account of internal pinch point. The results are helpful for the application of S-CO2 Brayton cycle in nuclear power system and provide a basis for subsequent experimental research.

Impact of cold source temperature on transcritical CO 2 power cycle: Design point optimization and off-design performance analysis

Experimental and Numerical Investigation on the Dynamic Characteristics of a Lab-Scale Transcritical CO2 Loop

Off-design performance analysis of supercritical CO 2 mixture Brayton cycle with floating critical points

An adaptive CO 2 Brayton-Rankine power cycle for efficient utilization of low environment temperature: A thermodynamic analysis and optimization study

Design Optimization and Operating Performance of S-CO 2 Brayton Cycle under Fluctuating Ambient Temperature and Diverse Power Demand Scenarios

A novel self-condensing transcritical CO 2 power cycle with a vortex tube: Thermoeconomic assessment study and comparison

Design optimization and off-design performance analysis of one-dimensional supercritical CO 2 Brayton cycle

Thermodynamic assessment of a novel and efficient self-condensing transcritical CO 2 power cycle with a vortex tube

Comprehensive analysis and thermo-economic optimization of the dry cooling system for supercritical CO 2 power cycle

Thermodynamic analysis and evaluation of a novel trans-critical CO2 power system incorporating partial condensation, sub-cooling, and recompression

Thermoeconomic Analysis Of Optimization Potential For Co2 Vapor Compression Cycle: From Transcritical To Supercritical Operation For Waste Heat Recovery From The Steam Condenser

Thermodynamic study of carbon dioxide transcritical refrigeration cycle with dedicated subcooling and cascade recooling

Optimization of CO2 Transcritical Power Cycle (CTPC) for engine waste heat recovery based on split concept

Off-design optimization for solar power plant coupling with a recompression supercritical CO2 Brayton cycle and a turbine-driven main compressor

Performance analysis of two-stage CO2 transcritical refrigeration cycles with absorption subcooling and mechanical recooling

Experimental and Economic Analysis of Optimization Potential for Annual Operating Characteristics of Air Source Transcritical CO2 Heat Pump System

Design and performance analysis of compressor and turbine in supercritical CO2 power cycle based on system-component coupled optimization

One-dimensional optimisation design and off-design operation strategy of centrifugal compressor for supercritical carbon dioxide Brayton cycle

Analysis of supercritical CO2 closed Brayton cycle applied to SMR

A comprehensive investigation on the design and off-design performance of supercritical carbon dioxide power system based on the small-scale lead-cooled fast reactor

Effect of Inter-Stage Pressure on Performances of Two-Stage Transcritical CO2 Refrigeration Cycle with Dedicated Absorption Dual-Subcooling and Mechanical Recooling