Abstract:The China initiative Accelerator Driven System (CiADS) is a 10 MW Lead-Bismuth-Eutectic (LBE) cooled sub-critical Fast Reactor (LFR) driven by a superconducting Linac coupling with a LBE spallation target. To operate CiADS from low power to full thermal power in 10 MW, it is necessary to develop a wide-range neutron flux monitor (NFM) for power monitoring. To cover over 7 order neutron flux, a fission chamber (FC) would be the best choice. This work focuses on the in-core neutron monitoring by using U-235 micro fission chamber (MFC) for study on local power variation. In addition, in-core fission rate can be obtained with MFC neutron measurement. CiADS-like core of LFR is built with a measurement channel to place MFC in the response simulations. The core k eff is changed within 100 pcm with a measurement channel moving from center to outward reflector in different assembly circles. Neutron proportions in three energy regions, mean neutron energy, and fission/capture reaction rate and their ratios are almost the flat in the axial distribution of fuel assemblies. There is a peak of mean neutron energy and high energy neutron component around target in the axial distribution of the first LBE assembly which is between target and fuel assembly. Radial distributions of high and intermediate energy neutron proportions are almost flat, but that of low energy neutron proportions is changed over 5 times. Neutron sensitivities of different detectors are calculated by using 3 groups neutron to fit the thermal neutron sensitivity provided by different manufacturers. Radial distributions of neutron responses are almost flat in the axial center positions of each assembly, but changed observably in outward axial positions. According to the simulations of in-core neutron response, it is demonstrated that detectors can work on the Pulse mode and Campbell mode to cover dynamic range from 1 mW to 20 MW in the neutron monitoring of CiADS-like core.

Design of Cold Neutron Source(CNS) in China Advanced Research Reactor(CARR)

Design Progress of Cryogenic Hydrogen System for China Spallation Neutron Source

The Future of Neutron Scattering in China: Meeting Increasing Demand with New Facilities?

China spallation neutron source design∗

Introduction of the prompt γ-ray neutron activation analysis system at CARR and the first pilot experiment on boron-containing high-temperature alloys

Thermal Hydraulic Analysis of China Spallation Neutron Source Target System Under Abnormal Situations

RF H-Minus Ion Source Development in China Spallation Neutron Source

Preliminary Design of CSNS-II Linac SRF LLRF

Some Features Of The Nuclear Heating Reactor (Nhr) Design In China

Conceptual design and safety characteristics of a new multi-mission high flux research reactor

Development of dual-harmonic RF system for CSNS-II

Design of RF Power System for CPHS

Neutron Beam Line Design of a White Neutron Source at CSNS

Optimization Study on Shielding Design for Horizontal Ducts of China Advanced Research Reactor

Development of the double spoke cavity prototype for CSNS-II

Developments of a 2D position sensitive neutron detector

The accelerator control system of CSNS

Design And Simulation Of A Cooling System For The High Current 4-Rod Rfq Cavity

Simulation of in-core neutron monitoring with U-235 micro fission chamber for CiADS-like LFR

Development Progress of Critical Equipment in the CSNS Cryogenic Hydrogen System

Conceptual Design of a Novel Megawatt Molten Salt Reactor Cooled by He-Xe Gas