Abstract:The two-stage fluidized bed/fixed bed reaction system was used to study the evolution characteristics of catalytic tar reforming process over biochar. The effect of different interaction time (feeding time varies within 10-50 min) between volatiles and char on the characteristics of char/tar is considered. InVia-Reflex Raman spectrometer (Raman), Fourier transform infrared spectrometer (FTIR), automatic specific surface and porosity analyzer, X-ray photoelectron spectrometer (XPS), inductively coupled plasma optical emission spectrometer (ICP-OES) were used to characterize the structural characteristics and alkali metal and alkaline earth metal species (AAEMs) content of biochar. The tar components were analyzed by gas chromatography-mass spectrometry (GC-MS) and the gas components were monitored by MCA 100 SYN synthetic gas analyzer. The results indicate that the tar removal efficiency of gasification char is over 70% when the interaction time is within 30 min. When corn straw is fed for 40 min, the carbon deposition on the surface of biochar reaches saturation. The size of coke particles is mainly in the range of 2-5 nm, and the structure is mainly small aromatic ring within five rings. During catalytic tar reforming over biochar, the content number of O-containing functional groups and surface K element decrease rapidly. The main removal path of toluene, styrene, phenol and indene in tar is heterogeneous reforming on biochar surface. Carbon deposition results in the increase of biochar external surface area (73.8m(2)/g to 158.1m(2)/g). The homogeneous reforming of styrene and toluene on biochar surface is enhanced. Under the catalysis of biochar surface, the self-gasification of biochar, water-gas shift reaction and methane steam reforming reaction are all promoted. This results in the increase of CO, CO2 and H-2 yield (9.68%, 52.38% and 69.63%), as well as the decrease of CH4 yield (25.23%) in the syngas of corn straw gasification.

EFFECT OF CHAR ON CATALYTIC CRACKING OF TAR FROM BIOMASS GASIFICATION GAS WITH TOLUENE AS A MODEL COMPOUND

Catalytic Cracking of Toluene As A Tar Model Compound Using Sewage-Sludge-Derived Char

Generation features and kinetics of gas products in bio-tar catalytic cracking by char for biomass gasification

Effect of Steam on the Tar Reforming during Circulating Fluidized Bed Char Gasification

Influence of Catalytic Cracking of Tar on Gas Component

Investigation on Model Compound of Biomass Gasification Tar Cracking in Microwave Furnace: Comparative Research

Cracking of Model Tar Species from the Gasification of Municipal Solid Waste Using Commercial and Waste-Derived Catalysts

Catalytic Cracking and Catalyst Deactivation/regeneration Characteristics of Fe-loaded Biochar Catalysts for Tar Model Compound

The Thermal Cracking Experiment Research of Tar Model Compound

Experimental Study on Catalytic and Thermal Cracking of Tar from Biomass Pyrolysis

Catalytic conversion characteristics of tar at different temperatures during circulating fluidized bed gasification

Effects of Catalytic Cracking Conditions on Biomass Tar Cracking

Steam Reforming of Biomass Tar Model Compounds over Monolithic Catalysts

Effects of Catalyst Particle Size and Mass on Catalytic Cracking of Biomass Pyrolysis Tar

CATALYTIC CRACKING OF TAR DERIVED FROM BIOMASS PYROLYSIS

Catalytic conversion of toluene as a biomass tar model compound using monolithic biochar-based catalysts decorated with carbon nanotubes and graphic carbon covered Co-Ni alloy nanoparticles

Mechanism of Catalytic Tar Reforming over Biochar: Description of Volatile-H2o-char Interaction

Experimental and Theoretical Studies on the Conversion of Biomass Pyrolysis Tar under the Effect of Steam

Steam reforming of toluene as model compound of biomass pyrolysis tar for hydrogen

Mechanism of In-Situ Catalytic Cracking of Biomass Tar over Biochar with Multiple Active Sites