Abstract:<p>The application of gasification to thermally treat biomass as carbon neutral resources has been constrained by the technical challenges associated with tar formations, which cause operational problems in downstream equipment for syngas processing. Catalysts, such as transition metals, calcined rocks and char, can be used to catalyse tar reforming. Biochars, which are naturally produced during biomass gasification, are particularly attractive as an alternative catalyst due to their catalytic functions, low cost and long endurance. Despite these promising characteristics, adequate knowledge on the relationship between the porous structure of biochar and its deactivation by coking during the steam reforming of tars is not available. In this work, the influence of the porous structure of biochar on its performance across time for reforming tar was investigated in a fixed-bed reactor, over a temperature range from 650 to 850 °C. Regular biochar and physically activated biochar from the same precursor biomass were employed as bed material. The tar samples were the composed mixture of benzene, toluene and naphthalene. Both fresh and spent catalysts were analysed with Brunauer-Emmet-Teller, t-plot, Fourier Transform Infrared and Scanning Electron Microscopy/Energy Dispersive Spectroscopy. Results showed that, while at moderate temperatures of 650 and 750 °C, the activated biochar offered a higher tar conversion but more severe deactivation than that of the regular biochar. At the high temperature of 850 °C, the difference in the catalytic performance between the two chars was negligible, and over 90% of the initial tar species were removed throughout the 3-hour long experiments. At 850 °C, the coke deposited in the meso- and macro-pores of both chars was gasified, leading to a stable catalytic performance of both chars. The results indicated that meso- and macro-porous biochars are resilient and active enough to become a viable option for tar steam reforming.</p>

Catalytic conversion characteristics of tar at different temperatures during circulating fluidized bed gasification

Effect of Steam on the Tar Reforming during Circulating Fluidized Bed Char Gasification

Advance in the treatment methods of biomass tar

Catalytic Tar Conversion in Two Different Hot Syngas Cleaning Systems

Influence of Catalytic Cracking of Tar on Gas Component

Experimental Study on Catalytic and Thermal Cracking of Tar from Biomass Pyrolysis

Generation features and kinetics of gas products in bio-tar catalytic cracking by char for biomass gasification

The Thermal Treatment Properties of the Tars from Sewage Sludge Gasification

Performance of biochar as a catalyst for tar steam reforming: Effect of the porous structure

Catalytic conversion of gaseous tars using land, coastal and marine biomass-derived char catalysts in a bench-scale downstream combined fixed bed system

Low-Temperature Catalytic Cracking of Biomass Gasification Tar over Ni/HZSM-5

Catalytic Cracking and Catalyst Deactivation/regeneration Characteristics of Fe-loaded Biochar Catalysts for Tar Model Compound

Catalytic Pyrolysis of Tar Model Compound with Various Bio-Char Catalysts to Recycle Char from Biomass Pyrolysis

Steam Reforming of Biomass Tar Model Compounds over Monolithic Catalysts

CATALYTIC CRACKING OF TAR DERIVED FROM BIOMASS PYROLYSIS

Catalytic Steam Reforming of Biomass Tar Model Compounds with Low Cost Catalysts: Effect of Operation Conditions

Photothermal Steam Reforming: A Novel Method for Tar Elimination in Biomass Gasification

Interaction mechanism in tar group components during the catalytic upgrading of gaseous tar

Effect of temperature and gasification gas from char on the reactions of volatiles generated from rapid pyrolysis of a low rank coal

Effects of Catalyst Particle Size and Mass on Catalytic Cracking of Biomass Pyrolysis Tar

Catalytic performance of activated lignite chars on biomass tar cracking