Abstract:Thin-film polycrystalline silicon (pc-Si) on foreign (non-silicon) substrates has been researched by various research groups for the production of photovoltaic cells. High quality pc-Si deposition on foreign substrates with superior optical properties is considered to be the main hurdle in cell fabrication. Metal induced crystallization (MIC) is one of the renowned techniques used to produce this quality of material. In the current study, an aluminum induced crystallization (AIC) method was adopted to produce pc-Si thin-film on aluminum nitride (AlN) substrate by a seed layer approach. Aluminum and a-Si layer were deposited using an e-beam evaporator. Various annealing conditions were used in order to investigate the AIC grown pc-Si seed layers for process optimization. The effect of thermal annealing on grain size, defects preferentially crystallographic orientation of the grains were analyzed. Surface morphology was studied using an optical microscope. Poly-silicon film with a crystallinity fraction between 95-100% and an FWHM between 5-6 cm−1 is achievable at low temperatures and for short time intervals. A grain size of about 10 micron can be obtained at a low deposition rate on an AIN substrate. Similarly, Focused ion beam (FIB) also showed that at 425 °C sample B and at 400 °C sample A were fully crystallized. The crystalline quality of pc-Si was evaluated using μ-Raman spectroscopy as a function of annealed conditions and Grazing incidence X-ray diffraction (GIXRD) was used to determine the phase direction of the pc-Si layer. The current study implicates that a poly-silicon layer with good crystallographic orientation and crystallinity fraction is achievable on AIN substrate at low temperatures and short time frames.

[Preparation and Characterization of Poly-Si Films on Different Topography Substrates by AIC].

Optimization of Material Structure of Ploy-Si Thin Film Based on Al Induced Crystallization

Low-Temperature (< 100 Degrees C) Poly-Si Thin Film Fabrication on Glass

EPITAXIAL GROWTH OF (0001)ORIENTED 6H-Sic FILMS ON Si(111) SUBSTRATE BY ORGANIC SOL-GEL FILM ANNEALING

Super large grain size of poly-Si obtained by using the solid-phase crystallization method

PREPARATION AND STUDY ON STRUCTURE OF THE POLYIMIDE/SILICA HYBRID AND NANOCOMPOSITE FILMS

Poly-crystalline thin-film by aluminum induced crystallization on aluminum nitride substrate

Preparation of High Quality Polycrystalline Silicon Thin Films by Aluminum-Induced Crystallization

Nickel Induced Crystallization of Amorphous Silicon Thin Films

Structural Analysis of Polycrystalline Silicon Thin Films Produced by Two Different ICPCVD Approaches

Growth of Poly-Crystalline Si Films on Flexible Substrate by Hot Wire Chemical Vapor Deposition

Novel Sandwich Structure for Aluminum Induced Crystallization of Amorphous Silicon Thin Films at Low Temperature

Aluminum-Induced Crystallization Of Pecvd Amorphous Silicon At 120 Degrees C

Preparation of Polycrystalline Silicon of 100μm Size Large Grain Thin Films by Metal Induced Crystallization

Influence of Precursor A-Si:H Dehydrogenation on the Aluminum Induced Crystallization Process

Influence of Substrate on Crystal Orientation of Large-Grained Si Thin Films Formed by Metal-Induced Crystallization

Structural and Electrical Properties of Polysilicon Films Prepared by AIC Process for a Polycrystalline Silicon Solar Cell Seed Layer

Preparation and Characterization of Anisotropic Chain Structures in Polyimide Films

Characterization of polycrystalline silicon carbide films grown by atmospheric pressure chemical vapor deposition on polycrystalline silicon

Aluminum-Induced Crystallization of PECVD Amorphous Silicon at 120°C

Structural properties of a-Si films and their effect on aluminum induced crystallization