Abstract:Purpose This study aims to research the influence mechanism of microtextured geometric parameters of dry gas seal end face on the tribological behavior under dry frictional conditions. Design/methodology/approach The microtexture was processed using laser processing, while the diamond-like carbon (DLC) film was applied through magnetron sputtering; the experimental platform of friction vibration was established, the frictional and vibrational properties of different geometric parameters were tested; the data signals of vibrational acceleration and frictional torque were collected and processed using data acquisition instrument. The entropy characteristic parameters of 3D vibrational acceleration were extracted based on wavelet packet decomposition method. The end-face topography was measured with ST400 three-dimensional noncontact surface topography instrument. Findings The geometry of pits plays a key role in influencing friction performance; the permutation entropy and fuzzy entropy of the vibration acceleration signal changed with variations in microtextured parameters. A textured surface with appropriately size parameters can trap debris, enhance the dynamic pressure effect, reduce impact between the friction interfaces and improve the frictional vibrational performance. In this research, microtextured surface with Φ150 μm-10% and Φ200 μm-5% can effectively reduce friction and vibration between the end faces of a dry gas seal. Originality/value DLC film improves the hardness of seal ring end face, and microtexture improves the dynamic effect; the tribological behavior monitoring can be realized by analyzing the characteristics of vibration acceleration sensitive parameter with friction state. The findings will provide a basis for further research in the field of tribology and the microtexture optimization of dry gas seal ring end face. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-12-2023-0389/

The effect of laser surface texturing on frictional performance of face seal

Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact

Influence of typical technological parameters on the processing quality of laser surface texturing technology for finger sealing

The Friction And Wear Behavior Of Laser Textured Surfaces In Non-Conformal Contact Under Starved Lubrication

Effect of Nanosecond Laser Texturization on Tribological Behavior of AISI 321 Stainless Steel

Laser Melting and Surface Texture Technology: Effect on Friction Properties

Experimental research on the frictional performance of real laser-textured cylinder liner under different lubrication conditions

Surface Texturing with Laser Multiple-Spot Scanning Technology

Surface Texturing for Low Friction Mechanical Components

Influence of microtextured parameters of dry gas sealing rings on tribological performance

Improving Tribological Performance of Mechanical Components by Laser Surface Texturing

Laser Surface Texturing of Stainless Steel − Effect of Pulse Duration on Texture's Morphology and Frictional Response

Mechanical Seal Face Texturing by the Acousto-Optic Q-Switched Pulsed Nd:Yag Laser

Effect of Zonal Laser Texturing on Friction Reduction of Steel Elements in Lubricated Reciprocating Motion

Additional Tribological Effect of Laser Surface Texturing and Diamond-Like Carbon Coating for Medium Carbon Steel at Near Room Temperature

Friction and wear properties of textured surface for bearing steel with mango-shaped micro geometries

An Experimental Investigation of Tribological Performance of Triangular Textures in Water Lubrication Regime

The Effect of Laser Texturing of Steel Surfaces on Film Lubriction Based on Stribeck Curves

Experimental investigation of the effect of typical surface texture patterns on mechanical seal performance

Anti-Wear Property of Laser Textured 42CrMo Steel Surface

Analysis of synergistic friction reduction effect on micro-textured cemented carbide surface by laser processing