Abstract:A newly developed method for the formation of nanowires by self-aggregation of nanoparticles is presented in this paper. Co3C, Co-rich, and Ni nanoparticles dispersed on holey carbon grids are inserted in a vacuum oven and are co-annealed with PolyChloroTriFluoroEthylene (PCTFE) at 375 degrees C. No external electric or magnetic fields were applied. High resolution electron microscopy (HREM) was extensively used to determine the shape, size distribution and crystallographic phase of the starting and produced materials. Interestingly, after an annealing circle of 72 hours, the nanoparticles seem to self-agglomerate into nanowires which have diameters in the 5-20 nm range and lengths exceeding at cases 1 micron. The diameter of the produced wires is in the same range as the diameter of the initial nanoparticles, further supporting the notion that the nanowires have formed out of nanoparticle agglomeration. Close inspection of nanowire HREM images shows that the core structure of nanowires wider than approximately 11 nm resembles linked nanoparticles. Phase identification performed using the HREM images reveals the core is of the same phase/material as the starting nanoparticles. Since nanowires appear to form over holes on the holey carbon grid, a base growth mechanism is proposed. The fluorocarbon vapour decomposes over the transitional metal nanoparticles and carbon tubules start growing. The nanoparticles appear to be trapped inside the tubules where their close proximity enhances their fusion into a continuous core. At the studied temperature, the nanoparticle fusion is seen to be limited by the size of the nanoparticles manifested by continuous cores only in the thin nanowires. The process presented here shows that nanoparticles can spontaneously self-align into nanowires in a way and to an extent never reported before. Therefore there is certainly scope for studying this method further to reveal more information about the catalytic action of transitional metals on hydrocarbons and the exact nanowire formation mechanism. Although it is currently a matter of speculation, this process might lead to the effortless growth of nanowires at particular places when building miniature circuits.

Silicon-based Nanowires from Silicon Wafers Catalyzed by Cobalt Nanoparticles in a Hydrogen Environment.

Ultrafast growth of single-crystalline Si nanowires

Sulfide-assisted Growth of Silicon Nano-Wires by Thermal Evaporation of Sulfur Powders

Silicon Nano-Wires Fabricated by a Novel Thermal Evaporation of Zinc Sulfide

Silicon Nano-Wires Fabricated by Thermal Evaporation of Silicon Wafer

A Novel Sulfide-Assisted Growth of Silicon Nano-Wires

Tiny silicon nano-wires synthesis on silicon wafers

Spontaneous self-agglomeration of magnetic nanoparticles into nanowires

Preparation Of Silicon Nanowires Under High Pressure

Tiny SiO2 nano-wires synthesized on Si (111) wafer

Tiny SiO2 nano-wires synthesized on Si (1 1 1 ) wafer

Silicon Nanowire Synthesis by Chemical Vapor Deposition

Silica Nanocoils.

Nanoscale Silicon Wires Synthesized Using Simple Physical Evaporation

Silicon nano-wires grown at low temperature

Silicon nanowires fabricated by thermal evaporation of silicon monoxide

Catalytic growth of α-FeSi2 and silicon nanowires

Silica-assisted catalytic growth of oxide and nitride nanowires

Silicon Nanowires Grown on Iron-Patterned Silicon Substrates

Silicon Nanowires, Catalytic Growth and Electrical Characterization

Catalyst-assisted Synthesis of Core–shell SiC/SiO 2 Nanowires Via a Simple Method