Abstract:On the basis of previous experimental studies of two-phase flow condensation heat transfer for R134a inside the horizontal micro-fin tubes, a theoretically analysis of heat transfer characteristic combining both heat transfer mechanism and flow mechanism is discussed by the experimental data of heat transfer coefficient and pressure drop, to further clarify the influence of experimental condition and tube structure on heat transfer characteristics under the special working condition. Two performance factors, enhancement factor (EF) and penalty factor (PF), are introduced to quantitatively compare the effect of micro-fin on the heat transfer coefficient and the pressure drop between enhance tube and smooth tube. Meanwhile, the comprehensive factor, CHF, is applied to evaluate the comprehensive performance of heat transfer tube. It was found that enhancement factor (EF) and penalty factor (PF) both increase with increasing mass flux and fin helical angle, and decreasing saturation temperature, the comprehensive factor, CHF, is always greater than one and increases with increasing fin helical angle and mass flux, and decreasing saturation temperature. Moreover, based on the comparative analysis findings that some existing correlations of heat transfer characteristics underestimate most of the experimental data, and the experimental variable has great influences on the correlation prediction accuracy, such as mass flux, which is proportionate to the prediction deviation of correlation. Therefore, a new correlation was developed through analyzing quantitatively influencing mechanism of the experimental variable on the heat transfer characteristics, in a way that a two-phase frictional multiplier is defined firstly from the experimental data and then the forced convection heat transfer mechanism is redefined based on the comprehensive effect of various experimental variables. By the experimental data verification, the new correlation shows good prediction effect with the mean deviation of less than 5%.

Influence of Parameters on Airside Performance of Wavy Fin-and-tube Heat Exchangers with Hydrophilic Coating under Dehumidifying Conditions

Heat Transfer and Friction Characteristics of Wavy Fin with Hydrophilic Coating under Dehumidifying Conditions

Airside Heat Transfer and Friction Characteristics for Enhanced Fin-and-tube Heat Exchanger with Hydrophilic Coating under Wet Conditions

Experimental Study of the Airside Performance for Interrupted Fin-and-tube Heat Exchanger with Hydrophilic Coating under Dehumidifying Conditions

Airside characteristics of heat, mass transfer and pressure drop for heat exchangers of tube-in hydrophilic coating wavy fin under dehumidifying conditions

Effects of Hydrophilic Coating on Air Side Heat Transfer and Friction Characteristics of Wavy Fin and Tube Heat Exchangers under Dehumidifying Conditions

The Effect of Hydrophilic Coating on Airside Performance of Split Fin-and-Tube Heat Exchangers under Wet Conditions

Study on heat transfer and friction characteristics in fin-tube heat exchangers used for electrical machines cooling

Experimental Study of the Air Side Performance of Fin-and-Tube Heat Exchanger with Different Fin Material in Dehumidifying Conditions

Influence of Surface Modification on the Transient Dehumidification Performance of Fin-and-tube Heat Exchanger

Air-side Heat Transfer Characteristics under Wet Conditions at Lower Ambient Pressure of Fin-and-tube Heat Exchanger

Effect Of Corrugation Angle Of Fin On Performance Of A Wavy Finned Tube Heat Exchanger Under Constant Fan Power Condition

Experimental and Numerical Investigation of Thermal -Hydraulic Performance in Wavy Fin-and-flat Tube Heat Exchangers

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Influence of Wet-Particle Deposition on Air-Side Heat Transfer and Pressure Drop of Fin-and-tube Heat Exchangers

3D Numerical Simulation of Heat and Mass Transfer of Fin-and-tube Heat Exchanger under Dehumidifying Conditions

Air-side Heat Transfer and Friction Characteristics of Biofouled Evaporator under Wet Conditions

Numerical Investigation on Heat and Mass Transfer of Slit Finned Tube Heat Exchanger with Humid Flue Gas

Thermal-hydraulic performance evaluation of airside of wavy fin compact heat exchangers under wet conditions

Fin Pattern Effects on Air-Side Heat Transfer and Friction Characteristics of Fin-and-Tube Heat Exchangers with Large Number of Large-Diameter Tube Rows

Airside Heat Transfer and Pressure Drop Characteristics of Slit Fin-and-Tube Heat Exchangers under Dehumidifying Conditions