Abstract:Two inverted non-lighting devices with the configurations of ITO/TPBi(40 nm)/C-60(x nm)/ZnPc(x nm)/NPB(40 nm) / Al (120 nm) (x = 0, 5, 10, and 15) and ITO/TPBi (40 nm)/LiF(y nm)/Al(2 nm)/C-60(5 nm)/ZnPc(5 nm)/MoO3 (3 nm)/NPB(40 nm)/Al (120 nm) (y = 0, 0.5, 1.0, and 1.5) were fabricated. The experiments illustrate that the organic heterojunction of C-60/ZnPc can realize charge separation under external field and demonstrate that ability of charge separation and injection can be efficiently improved by the electron injection layer of LiF/Al and hole injection layer of MoO3. C-60/ZnPc was used used as charge generation layer (CGL), LiF/Al and MoO3 were employed as charge injection layers. Moreover, a series of green phosphorescent Tandem Organic Light-Emitting Diodes (TOLEDs) based on the multilayer structure of LiF/Al/C-60/ZnPc/MoO3 was also fabricated to further explore the effect of the CGL on photoelectronic performances for tandem devices. Experimental results show that the performance of tandem devices can be influenced by the effect of charge separation and injection of CGL on charge-injection balance inside TOLEDs. When the multilayer structure is LiF(0.5 nm)/Al(1 nm)/C-60 (5 nm)/ZnPc(5 nm)/MoO3 (3 nm), a green TOLED with a better charge balance and an optimal device performance is achieved, the operating voltage of the tandem device is below two-fold of correspording single OLED. The peak luminance, peak current efficiency, and peak power efficiency for the green TOLED reach 84 660 cd . m(2), 94.7 cd . A and 43 lm . W-1 respectively,

Organic Light-Emitting-diodes by Inserting C60 As Exciton Barrier Layer

Efficient Single-Active-Layer Organic Light-Emitting Diodes With Fluoropolymer Buffer Layers

P-113: Society for Information Display: Novel Structure Organic Light-emitting Diodes With High Performance

P-113: Novel Structure Organic Light-Emitting Diodes with High Performance

Organic light-emitting diodes with varying thickness of bathocuproine layer

Study on the Influence of Embedded Structure of Carbon Quantum Dots of the Organic Solar Cells with the Territory Active Layer Structure of P3HT: PC61BM: CQDs

Bright Single-Active Layer Small-Molecular Organic Light-Emitting Diodes with a Polytetrafluoroethylene Barrier

Organic Light-Emitting Devices With Fullerene\Aluminum Composite Anode

Efficient Organic Light-Emitting Diode Using Lithium Tetra(8-Hydroxy-Quinolinato) Boron As the Electron Injection Layer

Effective Intermediate Layers for Highly Efficient Stacked Organic Light-Emitting Devices

Organic light-emitting devices with a 2-(4-biphenyl)-5-(4-butylphenyl)-1,3,4-oxadiazole layer between the α-naphtylphenyliphenyl diamine and 8-hydroxyquinoline aluminum

Green Phosphorescent Tandem Organic Light-emitting Diodes Based on Organic Heterojunction of C-60/ZnPc

Highly Efficient Nondoped Green Organic Light-Emitting Diodes with Combination of High Photoluminescence and High Exciton Utilization

Improved Performance of Alq(3)-based Organic Light-Emitting Diode with Multi-Layer Structure

Efficient Nondoped Organic Light-Emitting Diodes with CuI Complex Emitter

Electron Blocking and Hole Injection: the Role of N,N′-Bis(naphthalen-1-y)-N,N′-bis(phenyl)benzidine in Organic Light-Emitting Devices

Small-Molecular Organic Solar Cells with C-60/Al Composite Anode

Small Molecular Phosphorescent Organic Light-Emitting Diodes Using A Spin-Coated Hole Blocking Layer

An Efficient Blue Organic Light Emitting Structure

Efficient 1.54μm Light Emitting Diode with Nanometer Thick Polycrystalline Si Anode and Organic Sandwich Structure

Enhancing the contrast and power efficiency of organic light-emitting diodes using CuPc/TiOPc as an anti-reflection layer