Abstract:Two inverted non-lighting devices with the configurations of ITO/TPBi(40 nm)/C-60(x nm)/ZnPc(x nm)/NPB(40 nm) / Al (120 nm) (x = 0, 5, 10, and 15) and ITO/TPBi (40 nm)/LiF(y nm)/Al(2 nm)/C-60(5 nm)/ZnPc(5 nm)/MoO3 (3 nm)/NPB(40 nm)/Al (120 nm) (y = 0, 0.5, 1.0, and 1.5) were fabricated. The experiments illustrate that the organic heterojunction of C-60/ZnPc can realize charge separation under external field and demonstrate that ability of charge separation and injection can be efficiently improved by the electron injection layer of LiF/Al and hole injection layer of MoO3. C-60/ZnPc was used used as charge generation layer (CGL), LiF/Al and MoO3 were employed as charge injection layers. Moreover, a series of green phosphorescent Tandem Organic Light-Emitting Diodes (TOLEDs) based on the multilayer structure of LiF/Al/C-60/ZnPc/MoO3 was also fabricated to further explore the effect of the CGL on photoelectronic performances for tandem devices. Experimental results show that the performance of tandem devices can be influenced by the effect of charge separation and injection of CGL on charge-injection balance inside TOLEDs. When the multilayer structure is LiF(0.5 nm)/Al(1 nm)/C-60 (5 nm)/ZnPc(5 nm)/MoO3 (3 nm), a green TOLED with a better charge balance and an optimal device performance is achieved, the operating voltage of the tandem device is below two-fold of correspording single OLED. The peak luminance, peak current efficiency, and peak power efficiency for the green TOLED reach 84 660 cd . m(2), 94.7 cd . A and 43 lm . W-1 respectively,

Organic Light-Emitting Devices With Fullerene\Aluminum Composite Anode

Small-Molecular Organic Solar Cells with C-60/Al Composite Anode

[6,6]-Phenyl-c61-butyric Acid 2-((2-(dimethylamino)ethyl)(methyl)amino)-ethyl Ester As an Acceptor and Cathode Interfacial Material in Polymer Solar Cells

Experimental study of the organic light emitting diode with a p-type silicon anode

Top-emission organic light-emitting diode with a novel copper/graphene composite anode

High‐Efficiency Nonfullerene Organic Solar Cells with a Parallel Tandem Configuration

Multilayered Graphene Used As Anode of Organic Light Emitting Devices

Bilayer Graphene Anode for Small Molecular Organic Electroluminescence

High Contrast Organic Light-Emitting Devices with Improved Electrical Characteristics

Organic Light-Emitting Device with Surface-Modified Tungsten-Doped Indium Oxide Anode

Efficient Organic Electroluminescent Devices Based on an Organosamarium Complex

Degradation Of Small-Molecule Organic Solar Cells

Fullerene‐hybridized Fused‐ring Electron Acceptor with High Dielectric Constant and Isotropic Charge Transport for Organic Solar Cells

Small-Molecule Organic Solar Cells with Improved Stability

Green Phosphorescent Tandem Organic Light-emitting Diodes Based on Organic Heterojunction of C60/ZnPc

Integrated Molecular, Interfacial, and Device Engineering Towards High-Performance Non-Fullerene Based Organic Solar Cells.

High-Efficiency Microcavity Top-Emitting Organic Light-Emitting Diodes Using Silver Anode

A Top-Emission Organic Light-Emitting Diode with a Silicon Anode and an Sm∕Au Cathode

A Monolayer Organic Light-Emitting Diode Using an Organic Dye Salt

Conjugated Polymers, Fullerene C-60, and Carbon Nanotubes for Optoelectronic Devices

Recent Progress in Organic Solar Cells: A Review on Materials from Acceptor to Donor