Abstract:<p>Prestressed concrete cylinder pipes (PCCPs) are widely used in large-scale water conveyance projects. It is important to study the mechanical properties and loading response of PCCPs to ensure trouble-free operation. There were insufficient test data pertaining to the deformation of the concrete cores (including the inner and the outer concrete core), the prestressing wire, the mortar coating, especially the steel cylinder. In this paper, a full-scale test was performed on a PCCP under internal water pressure through fiber Bragg grating (FBG) sensing technology. The test results showed that the state of PCCPs would reach three limit-states successively. Firstly, the strains of the concrete cores, the prestressing wire, the steel cylinder and the mortar coating increased linearly with the growth of the internal water pressure. The cracks in the concrete cores indicated the beginning of the serviceability limit-state. The corresponding pressure is 1.8 MPa. The growth of the internal water pressure primarily affected the steel cylinder and the prestressing wire during the continuous period. When the steel cylinder yielded at the pressure of 2.25 MPa, the pipe reached its elastic limit-state. At last, the strength of the pipe decreased obviously as the cracks propagated throughout the concrete cores. The pipe would come to the strength limit-state until the prestressing wire yielded. The test results found that the internal water pressure relieved final prestress of the inner concrete core was different from that of the outer concrete core in the embedded-cylinder pipe (ECP). It was also proved that FBG sensing technology could be the continuous monitoring system for the condition assessment of PCCPs. In particular, the test results demonstrated that the appropriate quality of materials and proper operation guaranteed trouble-free operation of PCCPs. The objective of this research is to provide experimental references for the application of PCCPs and push back safety assessment of this type of large-diameter pipes.</p>

Discussion on friction head loss calculation for large diameter PCCP

Study on Drag Coefficient and Roughness of Prestressed Concrete Cylinder Pipe

Numerical Simulation of Tunnel Flow with a Concave-Convex Boundary

Calculation of Optimal Specific Frictional Head Loss in Condensate Network

Calculation Method of Prestressed Concrete Cylinder Pipe

Numerical Study of Resistance Loss and Erosive Wear during Pipe Transport of Paste Slurry

FRICTION LOSS CALCULATION AND SURFACE PRESSURE PREDICTION IN OIL WELL HYDRAULIC FRACTURING

Effects of Surface Roughness on Windage Loss and Flow Characteristics in Shaft-Type Gap with Critical CO2

Estimation and Analysis of Carbon Dioxide Friction Loss in Wellbore During Liquid/Supercritical Carbon Dioxide Fracturing

Uncertainty in Design Value of Roughness Coefficient for Large Scale Channel and Effects Analysis

Calculation of Friction Force for Slurry Pipe Jacking considering Soil-Slurry-Pipe Interaction

Prediction of Friction Resistance for Slurry Pipe Jacking

Analysis and Application of Friction Calculation Model for Long-Distance Rock Pipe Jacking Engineering

Solid friction coefficient in a horizontal straight pipe of pneumatic conveying

Robustness of water hammer protection of different formulas of frictional head loss

Experimental study on local flow resistance at junctions of circular pipes

Mechanical properties and loading response of prestressed concrete cylinder pipes under internal water pressure

Frictional resistance calculation and jacking force prediction of rectangular pipe jacking

Resistance coefficient for large-scale roughness with seepage through porous bed

Effects of Roughness on Fluid Flow Behavior in Ducts

A New Method to Estimate and Predict the Variation of Dry Friction Coefficient in Ultra-Long Distance Rock Pipe Jacking: A Case Study in Guanjingkou