Abstract:Despite recent advances in leak detection in water supply systems, previous studies focused mainly on material aspects or orifice opening characteristics. This study evaluated geometric, hydraulic, and hydrodynamic factors influencing on water leaks using three-dimensional (3D) computational fluid dynamics (CFD) simulations. The simulated discharge coefficient (C-d) had a maximum absolute deviation of 8% compared with experimental data. The results indicated that the variation of C-d as a function of the diameter and orifice size can be attributed to the effect of tube curvature on flow convergence through the orifice. The statistical analysis concluded that the orifice-to-pipe diameter ratio d/D is the best dimensionless parameter that explains this phenomenon, which agreed with the analyses of the streamlines and turbulent eddy dissipation rate in the simulations. Other important dimensionless parameter are the ratio of the pressure head differential at the orifice to the pipe diameter Delta H/D, Reynolds number (R), and the ratio of the pressure head differential at the orifice to the wall thickness Delta H/e, in order of relevance. A set of empirical correlations was elaborated through a nonlinear multiple regression analysis with Reynolds numbers ranging between 12,000 and 52,000, and pressure head differential ranging from 1 to 45 m. This study advances the knowledge of cross-flows through orifices, and the proposed correlations potentially can improve the prediction of water leaks in pipes. (c) 2023 American Society of Civil Engineers. Practical Applications: This study demonstrates the applicability of computational fluid dynamics simulations for understanding the leakage phenomenon in pipes, and obtained a set of empirical correlations that potentially can improve the prediction of leakages in water distribution systems. The authors propose an equation for estimating the discharge coefficient in practical applications. This equation balances the number of terms (three dimensionless coefficients) and accuracy (R-2 = 98%). Although it is dimensionless, the correlation must be used within the established ranges of values to ensure its effectiveness: Reynolds numbers from 12,000 to 52,000, and pressure head differentials from 1 to 45 m.

Experimental study on local flow resistance at junctions of circular pipes

Local energy loss at right-angle junction of circular pipes

Local Energy Loss at Junction of Pressurized Pipes with Rectangular Cross Section

Influence of local energy loss at junctions on hydraulic calculation of pipeline network

Numerical simulation of 3-D turbulent flows in a cut-off valve and analysis of flow characteristics in pipe

An Experimental Study Of Compressible Combining Flow At 45 Degrees T-Junctions

Experimental investigation on pressure loss of compressible combining flow at 45°T-junctions

Numerical Investigation and Optimization of the Flow Characteristics of Bend Pipe with Different Bending Angles

CFD-DEM Analysis of Hydraulic Conveying Bends: Interaction Between Pipe Orientation and Flow Regime

ESTIMATION OF THE LOSS COEFFICIENT FOR CONDUIT BENDS WITH CIRCULAR CROSS SECTION BY THE SECOND LAW APPROACH

Comprehensive study of combining flow conditions at pipe junctions

Mean Pressure Distributions on the Vanes and Flow Loss in the Branch in a T Pipe Junction with Different Angles

Theoretical and experimental study on flow distribution at fracture intersections

Computational Simulation of the Flow Induced by Water Leaks in Pipes

Preliminary Experimental Study on Pressure Loss Coefficients of Exhaust Manifold Junction

Effect of Deflectors on the Flow Characteristics of a Square Pipe with a 90° Bend

Numerical Study on Flow Irreversibility and Wear of Elbow-Reducer Pipe Connection with Gas-Solid Two Phase Flow

Numerical and Experimental Investigation on Leak Discharge-Pressure Relationship for Linear Elastic Deforming Pipes

Experimental study on discharge coefficient of a cylindrical hole with gas jets in liquid crossflow

Experimental study on flow rate and pressure drop characteristics in T-junction pipes under rolling conditions

Study on the Separation Zone in Open-Channel Junction