Abstract:Despite recent advances in leak detection in water supply systems, previous studies focused mainly on material aspects or orifice opening characteristics. This study evaluated geometric, hydraulic, and hydrodynamic factors influencing on water leaks using three-dimensional (3D) computational fluid dynamics (CFD) simulations. The simulated discharge coefficient (C-d) had a maximum absolute deviation of 8% compared with experimental data. The results indicated that the variation of C-d as a function of the diameter and orifice size can be attributed to the effect of tube curvature on flow convergence through the orifice. The statistical analysis concluded that the orifice-to-pipe diameter ratio d/D is the best dimensionless parameter that explains this phenomenon, which agreed with the analyses of the streamlines and turbulent eddy dissipation rate in the simulations. Other important dimensionless parameter are the ratio of the pressure head differential at the orifice to the pipe diameter Delta H/D, Reynolds number (R), and the ratio of the pressure head differential at the orifice to the wall thickness Delta H/e, in order of relevance. A set of empirical correlations was elaborated through a nonlinear multiple regression analysis with Reynolds numbers ranging between 12,000 and 52,000, and pressure head differential ranging from 1 to 45 m. This study advances the knowledge of cross-flows through orifices, and the proposed correlations potentially can improve the prediction of water leaks in pipes. (c) 2023 American Society of Civil Engineers. Practical Applications: This study demonstrates the applicability of computational fluid dynamics simulations for understanding the leakage phenomenon in pipes, and obtained a set of empirical correlations that potentially can improve the prediction of leakages in water distribution systems. The authors propose an equation for estimating the discharge coefficient in practical applications. This equation balances the number of terms (three dimensionless coefficients) and accuracy (R-2 = 98%). Although it is dimensionless, the correlation must be used within the established ranges of values to ensure its effectiveness: Reynolds numbers from 12,000 to 52,000, and pressure head differentials from 1 to 45 m.

Influence of local energy loss at junctions on hydraulic calculation of pipeline network

Local energy loss at right-angle junction of circular pipes

Experimental study on local flow resistance at junctions of circular pipes

Numerical Simulation of Serial Sudden Expansions Pipe Flow

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

Local Energy Loss at Junction of Pressurized Pipes with Rectangular Cross Section

Pressure-balanced Saint–Venant Equations for Improved Asymptotic Modelling of Pipe Flow

Numerical simulation of 3-D turbulent flows in a cut-off valve and analysis of flow characteristics in pipe

Efficient Numerical Approach for Simultaneous Calibration of Pipe Roughness Coefficients and Nodal Demands for Water Distribution Systems

Semi-analytical Solution for Dynamic Behavior of a Fluid-Conveying Pipe with Different Boundary Conditions

Influence and Numerical Simulation of Local Head Losses on Pressured Conduit Hydraulic Transients

APPLICATION OF DIFFERENT TURBULENT MODELS IN CALCULATION OF FLOW RESISTANCE IN PIPELINES AND COMPARISON THEREOF

Simulation and experimental verification on fluid-structure interaction of T-shaped pressure pipeline

Influence of Velocity Head on Filling Transients in a Branched Pipeline

Improved Calculation Method for Siphon Drainage with Extended Horizontal Sections

Computational Simulation of the Flow Induced by Water Leaks in Pipes

Research on Pipeline Leakage Calculation and Correction Method Based on Numerical Calculation Method

Numerical evaluation of the coupled/uncoupled effectiveness of a fluid-solid-thermal multi-field model for a long-distance energy transmission pipeline

Data-driven Computation of Natural Gas Pipeline Network Hydraulics

Numerical simulation of pressure loss and flow characteristics in combined elbow pipes for solid-liquid two-phase flow

Comprehensive study of combining flow conditions at pipe junctions